Chemical Pumps
Finish Thompson chemical
pumps
Finish Thompson Inc. industrial
chemical pumps enjoy a reputation for state-of-the-art pump engineering,
quality, delivery, as a diversified manufacturer of industrial chemical
pumps. Product line ranges from drum pumps to horizontal end suction
and vertical pumps, magnetic magdrive coupled (with true run-dry
capability) and mechanical sealed. Finish Thompson also makes ANSI
dimensional magnetic drive process pumps for chemicals.
| kc6
MagDrive ( 33gpm23psi ) |
|
 |
Magdrive sealless
industrial pumps designed by Finish Thompson for chemical
processing and the highest level of reliability.All series
KC pumps from FTI feature Neodymium Rare-Earth magnets.
This series of pumps runs dry endlessy and can handle up to
1.8 S.G. The Magnetic Coupling is not effected by high
tempetaures. VIRUALLY UNBREAKABLE CANTILEVERED CERAMIC SPINDLE
availiable in polypro and kynar. |
March chemical pumps
March specializes in a wide range of precise, highlyreliable magnetic
drive centrifugal pumps. March pumps are designed for virtually
any application. These include pumps for handling a virtually unlimited
array of fluids from water to highly corrosive or acidic solutions,
as well as high temperature liquids. Various designs range from
aircooled to fully submersible electric-powered unit motors to air
motor-driven models for certain environments. Whether it’s
a special pump design for an OEM application, or for a unique industrial
process, March is your source for reliable, efficient solutions
to difficult pumping problems. For worldwide availability and unparalleled
service, contact March. No shaft, no seals, no seal problems. Introduced
in 1963, March’s patented magnetically coupled drive designs
eliminate shaft seals and the many problems they can cause. Torque
is transmitted by a magnetic field from the magnet attached to the
motor, through the solid body, to the magnet attached to the impeller.
| 10
Magdrive Chemical |
|
 |
The largest and
newest chemical pump in the MARCH product line is the TE-10K-MD.
It has capacities of 206 GPM and a maximum discharge pressure
of 70 PSI or 162 feet of head. It is of Kynar® plastic
(PVDF) construction and is designed to handle strong halogen
solutions and certain strong chromic or sulfuric acid solutions.
Because the TE-10K-MD pump is manufactured of only one material,
for some rather specific applications, the variations in bushings,
thrust washer and static "O" rings are limited.
The electric motor drive for the number 10 pump is a 10 HP,
3 phase, dual voltage, TEFC chemical duty motor. An explosion
proof 15 HP is available on special order.
To insure smooth operation with various specific gravities,
the impeller magnet assembly may be trimmed to a minimum diameter
of 5.250 inches. The trim curve family should be consulted
for other trim sizes for total compatibility with solutions
of 1.0 specific gravity or higher. |
Serfilco
Chemical Pump
Serfilco's chemical pumps.
Horizontal chemical pumps, Vertical pumps for chemicals, chemical
metering pumps, magnetic pumps and filters for chemicals . SERFILCO
put the mechanical seal outside the pump so as not to expose the
metal parts of the seal to the chemical. Vertical sump pumps are
made in both sealless and those with bearings up to 12 Ft. long.
Chemical
Pumps Pumps, Filters and Filter systems are non-metalic and
made from Polypropylene, CPVC and Kynar.
| HE
Serfilco Horizontal Chemical Pump |
|
The
Serfilco Series "HE" horizontal chemical pump
is capable of "total" chemical resistance, both internally
and externally with its non-metallic construction of all wetted
components, choice of seal assembly and elastomer materials.
Enclosed centrifugal impeller. Engineering type plastics provide
application to a variety of chemicals which would be corrosive
to other materials of construction. the totally enclosed impeller
allows this pump to operate at peak horsepower efficiency
across a broad range of operational flow/head requirements.
Double mechanical seal model requires water lubrication of
seal faces & allows the pump to be used for solutions
containing abrasives, high salt concentrations& electroless
plating solutions.. |
Types
of Chemical Pumps:
| Mechanical
Sealed: |
 |
Magnetically
Coupled: |
 |
| Vertical-
Seal less : |
 |
Gear: |
|
| Diaphragm
- AODD: |
 |
Drum: |
 |
ALL
Manafactures offering Chemical Pumps
March
|
|
|
Serfelco
|
FTI
|
ASP
|
| Allflo
|
|
|
|
