Double diaphragm pumps are operated by compressed air or any non-flammable compressed gas. The pumping stroke begins as air is delivered by the air distribution system, putting pressure on one diaphragm and then the opposite diaphragm. The two diaphragms are linked together by a common rod. The pumping stroke on one side is simultaneously the suction stroke on the opposing diaphragm alternately drawing fluid in one side while discharging fluid from the other side
All The Diaphragm Pumps in this series are 1 inch and have a Bolted design.
Click here to Learn How to Size your Diaphragm Pump and for a Material Selection Guide- Typical Applications:
- Machine lube servicing
- Cleaning fluids & detergents
- Plating & dip tanks
- Water treatment
- Chemicals
- Drum evacuation
- Chemical injection
- Ceramic glaze supply
Manufacturer: All-Flo Diaphragm Pump Trash Pumps
Model Number: SE-10
Maximum Flow : 40 gallons/min
TDH (Head) Maximum @ 0GPM : 99.57 PSI
Head (TDH) Maximum @ 0GPM : 230 FT
TDH Minimum : 5
Inlet Connection Type : Flange
Inlet : 1 "
Outlet Connection Type : Flange
Outlet : 1 "
Wetted Materials : 316SS
Elastomers : EPDM
Diaphragm : Santoprene
Motor : Air-Pneumatic
Self Priming : 1
Suction Lift : 15 FT
Max Operating Temp : 200 °F
Viscosity : Catsup 3000.00 cp 20000.00 ssu
Max. Particle Size : 0.25 "
Max Specific Gravity : 2 sp. gr.
Max. Particle Hardness : 4 MOH
Max. Volume of Suspended Solids : 50 %
Mechanical Seal Type : Double
Warranty : 5 Year/s
Applications : Chemical
Applications : Flooded Suction
Applications : Self-Priming
Applications : Solvent
PH High : 7 pH
Other : min. air 20 psi, max. air 4 cf
| Read more… |
$141000
ea.
|
Manufacturer: All-Flo Diaphragm Pump Trash Pumps
Model Number: PB-10
Maximum Flow : 40 gallons/min
TDH (Head) Maximum @ 0GPM : 110.65 PSI
Head (TDH) Maximum @ 0GPM : 255.6 FT
TDH Minimum : 5
Inlet Connection Type : Flange
Inlet : 1 "
Outlet Connection Type : Flange
Outlet : 1 "
Wetted Materials : PolyPro-GF
Elastomers : Buna-Nitrile
Diaphragm : Geolast
Motor : Air-Pneumatic
Self Priming : 1
Suction Lift : 20 FT
Max Operating Temp : 150 °F
Viscosity : Catsup 3000.00 cp 20000.00 ssu
Max. Particle Size : 0.63 "
Max Specific Gravity : 2 sp. gr.
Max. Particle Hardness : 4 MOH
Max. Volume of Suspended Solids : 50 %
Mechanical Seal Type : Double
Warranty : 5 Year/s
Applications : Coolant
Applications : Dewatering
Applications : Drum
Applications : High Pressure
Applications : Metering
Applications : Mud
Applications : Paint
Applications : Self-Priming
Applications : Sewage
Applications : Slurry, Slush & Sludge
Applications : Sump
PH High : 7 pH
Other : Geolast is EPDM base. min. air
| Read more… |
$69900
ea.
|
Manufacturer: All-Flo Diaphragm Pump Trash Pumps
Model Number: KV-10 Diaphragm pump
Maximum Flow : 40 gallons/min
TDH (Head) Maximum @ 0GPM : 110.65 PSI
Head (TDH) Maximum @ 0GPM : 255.6 FT
TDH Minimum : 5
Inlet Connection Type : Flange
Inlet : 1 "
Outlet Connection Type : Flange
Outlet : 1 "
Wetted Materials : PVDF-Kynar
Wetted Materials : Teflon
Elastomers : Viton
Diaphragm : Viton
Motor : Air-Pneumatic
Self Priming : 1
Suction Lift : 20 FT
Max Operating Temp : 150 °F
Viscosity : Catsup 3000.00 cp 20000.00 ssu
Max. Particle Size : 0.63 "
Max Specific Gravity : 2 sp. gr.
Max. Particle Hardness : 4 MOH
Max. Volume of Suspended Solids : 50 %
Mechanical Seal Type : Double
Warranty : 5 Year/s
Applications : Coolant
Applications : Dewatering
Applications : Drum
Applications : High Pressure
Applications : Metering
Applications : Mud
Applications : Paint
Applications : Self-Priming
Applications : Sewage
Applications : Slurry, Slush & Sludge
Applications : Sump
PH High : 7 pH
Other : Geolast is EPDM base. min. air
| Read more… |
$149700
ea.
|
Manufacturer: All-Flo Diaphragm Pump Trash Pumps
Model Number: PE-10
Maximum Flow : 40 gallons/min
TDH (Head) Maximum @ 0GPM : 110.65 PSI
Head (TDH) Maximum @ 0GPM : 255.6 FT
TDH Minimum : 5
Inlet Connection Type : Flange
Inlet : 1 "
Outlet Connection Type : Flange
Outlet : 1 "
Wetted Materials : PolyPro
Elastomers : EPDM
Diaphragm : Santoprene
Motor : Air-Pneumatic
Self Priming : 1
Suction Lift : 20 FT
Max Operating Temp : 150 °F
Viscosity : Catsup 3000.00 cp 20000.00 ssu
Max. Particle Size : 0.63 "
Max Specific Gravity : 2 sp. gr.
Max. Particle Hardness : 4 MOH
Max. Volume of Suspended Solids : 50 %
Mechanical Seal Type : Double
Warranty : 5 Year/s
Applications : Chemical
Applications : Coolant
Applications : Dewatering
Applications : Drum
Applications : High Pressure
Applications : Metering
Applications : Mud
Applications : Paint
Applications : Self-Priming
Applications : Sewage
Applications : Slurry, Slush & Sludge
Applications : Sump
PH High : 10 pH
Other : Geolast is EPDM base. min. air
Approvals : UL
| Read more… |
$69900
ea.
|
Manufacturer: All-Flo Diaphragm Pump Trash Pumps
Model Number: SB-10
Maximum Flow : 40 gallons/min
TDH (Head) Maximum @ 0GPM : 99.57 PSI
Head (TDH) Maximum @ 0GPM : 230 FT
TDH Minimum : 5
Inlet Connection Type : Flange
Inlet : 1 "
Outlet Connection Type : Flange
Outlet : 1 "
Wetted Materials : 316SS
Elastomers : Buna-Nitrile
Diaphragm : Geolast
Motor : Air-Pneumatic
Self Priming : 1
Suction Lift : 15 FT
Max Operating Temp : 200 °F
Viscosity : Catsup 3000.00 cp 20000.00 ssu
Max. Particle Size : 0.25 "
Max Specific Gravity : 2 sp. gr.
Max. Particle Hardness : 4 MOH
Max. Volume of Suspended Solids : 50 %
Mechanical Seal Type : Double
Warranty : 5 Year/s
Applications : Flooded Suction
Applications : Chemical
Applications : High Pressure
Applications : Self-Priming
Applications : Sewage
Applications : Slurry, Slush & Sludge
PH High : 7 pH
Other : min. air 20 psi, max. air 4 cf
| Read more… |
$100800
ea.
|
Manufacturer: All-Flo Diaphragm Pump Trash Pumps
Model Number: PT-10
Maximum Flow : 40 gallons/min
TDH (Head) Maximum @ 0GPM : 110.65 PSI
Head (TDH) Maximum @ 0GPM : 255.6 FT
TDH Minimum : 5
Inlet Connection Type : Flange
Inlet : 1 "
Outlet Connection Type : Flange
Outlet : 1 "
Wetted Materials : PolyPro
Wetted Materials : Teflon
Elastomers : Teflon-PTFE
Diaphragm : PTFE-Teflon
Motor : Air-Pneumatic
Self Priming : 1
Suction Lift : 20 FT
Max Operating Temp : 150 °F
Viscosity : Catsup 3000.00 cp 20000.00 ssu
Max. Particle Size : 0.63 "
Max Specific Gravity : 2 sp. gr.
Max. Particle Hardness : 4 MOH
Max. Volume of Suspended Solids : 50 %
Mechanical Seal Type : Double
Warranty : 5 Year/s
Applications : Chemical
Applications : Coolant
Applications : Drum
Applications : High Pressure
Applications : Metering
Applications : Paint
Applications : Self-Priming
Applications : Solvent
Applications : Sump
PH High : 7 pH
Other : Geolast is EPDM base. min. air
| Read more… |
$92600
ea.
|
Manufacturer: All-Flo Diaphragm Pump Trash Pumps
Model Number: KT-10 PVDF
Maximum Flow : 40 gallons/min
TDH (Head) Maximum @ 0GPM : 110.65 PSI
Head (TDH) Maximum @ 0GPM : 255.6 FT
TDH Minimum : 5
Inlet Connection Type : Flange
Inlet : 1 "
Outlet Connection Type : Flange
Outlet : 1 "
Wetted Materials : PVDF-Kynar
Wetted Materials : Teflon
Elastomers : Buna-Nitrile
Diaphragm : PTFE-Teflon
Motor : Air-Pneumatic
Self Priming : 1
Suction Lift : 20 FT
Max Operating Temp : 200 °F
Viscosity : Catsup 3000.00 cp 20000.00 ssu
Max. Particle Size : 0.06 "
Max Specific Gravity : 2 sp. gr.
Max. Particle Hardness : 4 MOH
Max. Volume of Suspended Solids : 50 %
Mechanical Seal Type : Double
Warranty : 5 Year/s
Applications : Chemical
Applications : Drum
Applications : Explosion-Proof
Applications : High Pressure
Applications : Metering
Applications : Paint
Applications : Self-Priming
Applications : Solvent
Applications : Slurry, Slush & Sludge
Applications : Sump
PH High : 7 pH
Other : Geolast is EPDM base. min. air
| Read more… |
$149700
ea.
|
Manufacturer: All-Flo Diaphragm Pump Trash Pumps
Model Number: KE-10 kynar
Maximum Flow : 40 gallons/min
TDH (Head) Maximum @ 0GPM : 110.65 PSI
Head (TDH) Maximum @ 0GPM : 255.6 FT
TDH Minimum : 5
Inlet Connection Type : Flange
Inlet : 1 "
Outlet Connection Type : Flange
Outlet : 1 "
Wetted Materials : PVDF-Kynar
Elastomers : EPDM
Diaphragm : Santoprene
Motor : Air-Pneumatic
Self Priming : 1
Suction Lift : 20 FT
Max Operating Temp : 150 °F
Viscosity : Catsup 3000.00 cp 20000.00 ssu
Max. Particle Size : 0.06 "
Max Specific Gravity : 2 sp. gr.
Max. Particle Hardness : 4 MOH
Max. Volume of Suspended Solids : 50 %
Mechanical Seal Type : Double
Warranty : 5 Year/s
Applications : Dewatering
Applications : Drum
Applications : High Pressure
Applications : Metering
Applications : Mud
Applications : Paint
Applications : Self-Priming
Applications : Slurry, Slush & Sludge
PH High : 7 pH
Other : Geolast is EPDM base. min. air
| Read more… |
$130900
ea.
|
Manufacturer: All-Flo Diaphragm Pump Trash Pumps
Model Number: PV-10
Maximum Flow : 40 gallons/min
TDH (Head) Maximum @ 0GPM : 110.65 PSI
Head (TDH) Maximum @ 0GPM : 255.6 FT
TDH Minimum : 5
Inlet Connection Type : Flange
Inlet : 1 "
Outlet Connection Type : Flange
Outlet : 1 "
Wetted Materials : PolyPro
Elastomers : Viton
Diaphragm : Viton
Motor : Air-Pneumatic
Self Priming : 1
Suction Lift : 20 FT
Max Operating Temp : 150 °F
Viscosity : Catsup 3000.00 cp 20000.00 ssu
Max. Particle Size : 0.63 "
Max Specific Gravity : 2 sp. gr.
Max. Particle Hardness : 4 MOH
Max. Volume of Suspended Solids : 50 %
Mechanical Seal Type : Double
Warranty : 5 Year/s
Applications : Chemical
Applications : Coolant
Applications : Dewatering
Applications : Drum
Applications : High Pressure
Applications : Metering
Applications : Paint
Applications : Self-Priming
Applications : Slurry, Slush & Sludge
Applications : Sump
PH High : 7 pH
Other : Geolast is EPDM base. min. air
| Read more… |
$92600
ea.
|
Manufacturer: All-Flo Diaphragm Pump Trash Pumps
Model Number: SV-10
Maximum Flow : 40 gallons/min
TDH (Head) Maximum @ 0GPM : 99.57 PSI
Head (TDH) Maximum @ 0GPM : 230 FT
TDH Minimum : 5
Inlet Connection Type : Flange
Inlet : 1 "
Outlet Connection Type : Flange
Outlet : 1 "
Wetted Materials : 316SS
Elastomers : Viton
Diaphragm : Viton
Motor : Air-Pneumatic
Self Priming : 1
Suction Lift : 15 FT
Max Operating Temp : 200 °F
Viscosity : Catsup 3000.00 cp 20000.00 ssu
Max. Particle Size : 0.25 "
Max Specific Gravity : 2 sp. gr.
Max. Particle Hardness : 4 MOH
Max. Volume of Suspended Solids : 50 %
Mechanical Seal Type : Double
Warranty : 5 Year/s
Applications : Chemical
Applications : Contractor
Applications : Dewatering
Applications : Flooded Suction
Applications : High Pressure
Applications : Plating
Applications : Sewage
Applications : Slurry, Slush & Sludge
Applications : Solvent
Applications : Sump
Applications : Self-Priming
PH High : 7 pH
Other : min. air 20 psi, max. air 4 cf
| Read more… |
$122800
ea.
|



