Pumps for acids are often used to unload trucks carrying chemical products or IBC containers. But the problem when dealing with trucks is that they often don't have an electric box with
Every month pumpbiz plans to give out a free pump to someone in need. Head over to http://freepumps.com and submit your story. We will contact the person with the most compelling story at the
Trucks, cars, and other vehicles as well as other Small engines running on our propane conversion systems have been proven to have 80% cleaner emissions and help the engine last longer than
Graymills pumps are typically found on OEM machine tool equipment and are thus
well suited for replacement or retrofit machine tool pumping applications. These
pumps can also be used on other industrial applications requiring a vertical cast iron
or stainless pump. Ideal for coolant
and lubrication systems, parts cleaners.
HR Series pumps are widely used for circulating thin liquids, and abrasives. Impellers are open type. No bearings, packings, or seals below liquid level. HR Series pumps can be purchased as part of a pump and tank system with 5, 6, or 10 gallon capacities. Viscosities and discharge diameter vary with pump model and are listed below.
HR 15 Specifications: 1/15 HP, 3000 RPM, 3/8” O.D., slip-on vertical discharge. Maximum viscosity: 100 SSU.
HR 35 Specifications: 1/25 HP, 1500 RPM, ½” NPT horizontal discharge. Maximum viscosity: 150 SSU.
HR 45 Specifications: 1/8 HP, 1725 RPM, ½” NPT horizontal discharge. Maximum viscosity: 500 SSU. HR 45 pump is available as an Agitator style pump (See HRAG model).
The HR 35 and 45 pumps are available with a nickel-plated body and volute and a stainless steel shaft for special applications.
Note: Information about the flow curves:
1. HR45/49 water
2. HR35 water
3. HR45/49 100 SSU oil
4. HR45/49 300 SSU oil
5. HR15 water
6. HR35 100 SSU oil
There are no products in this category.