Pumpbiz

Ask Henry - Interactive Pump Selector
Contact Us:

1-800-PUMPBIZ
1-800(786-7249)

Live Chat
PumpU
Hot Buys

Pump News

A quick and easy way to unload trucks

Pumps for acids are often used to unload trucks carrying chemical products or IBC containers. But the problem when dealing with trucks is that they often don't have an electric box with …

Read More


FREEPUMPS

Every month pumpbiz plans to give out a free pump to someone in need. Head over to http://freepumps.com and submit your story.  We will contact the person with the most compelling story at the …

Read More


Propane BI-FUEL upgrade Kit

 Trucks, cars, and other vehicles as well as other Small engines running on our propane conversion systems have been proven to have 80% cleaner emissions and help the engine last longer than …

Read More


Sump pumps submersible for residential, commercial and industrial water sump applications, along with pool cover dewatering. Sump pump design long trusted by professionals. Built with rugged materials and solid design for long sump pump life. Do not be fooled by warranty and flashy looking pumps in the consumer marketplace. While we have many of these same brands we would recommend the quality pumps that any contractor would use.

Designed with upper and lower ball bearings and a heavy-duty cast iron housing, vortex impeller, the PF33 and PF50 are further enhanced by a stainless steel shaft and ceramic shaft seals for durability and long life.

These sump pump models also feature automatic thermal overload protection and a permanent split capacitor motor for longer motor life, greater starting torque and lower amp draw. Feature piggyback plug to allow automatic or manual operation. This further extends the value and life of the pump because you can easily change out the switch if it goes bad. Switches are adjustable vertical or swing floats to accommodate varying conditions.

PF33 and PF50 sump pump is interchangeable with competing sump pump models like Dayton or Teel sump pump.

With 1/2 inch spherical solids capability, the PF33 and PF50 feature maximum flow rates to 50 gpm (3000 GPH) and 66 gpm (3960 GPH), respectively, and shut off heads to 30 Feet. Compact construction makes these pumps capable of fitting into 5-gallon buckets or tray systems. Backup sump pump click here.
Models are available with level switch ("auto") and without float switches. 1/3 to 1/2HP and to 66 gpm.
Besure to check out our sandless sand bag the Floodsax. Provides flood protection where a pump is not possible and doen't want to deal with heavy messy sand. Great for around drains, celar doors, patio doors and the people who can not lift or be home in times of flooding.

Jump to the first pageJump to the previous page Jump to the next pageJump to the last page
Manufacturer: Power-Flo
Model Number: PF50VF-X
Maximum Flow : 65 gallons/min
TDH (Head) Maximum @ 0GPM : 12.99 PSI
Head (TDH) Maximum @ 0GPM : 30 FT
HP Standard : 0.5 HP
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : CI-Plastic
Elastomers : Buna-Nitrile
Voltage : 115 V
Phase : 1
Frequency : 60 Hz
Motor : Hermetically Sealed
Motor Amps : 6.8 A
Speed : 1725 RPM
Length : 10.2 "
MTR Cord Length : 20 FT
Max Operating Temp : 104 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.5 "
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 2 %
Shaft : 416SS
Mechanical Seal : 6A
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Motor Bearings : Ball, oil lubricated
Impeller Mat'l / Type : Cast Iron, semi-open Vortex
Warranty : 2 Year/s
Applications : Contractor
Applications : Fountain
Applications : Pond
Applications : Sump
PH High : 8 pH
Other : Cord length 10ft, pump diamete
Approvals : cUL
Approvals : CSA
Duty : Continuous
Read more…  
$26100
Manufacturer: Power-Flo
Model Number: PF50A-X
Maximum Flow : 65 gallons/min
TDH (Head) Maximum @ 0GPM : 12.99 PSI
Head (TDH) Maximum @ 0GPM : 30 FT
HP Standard : 0.5 HP
Watts : 0 W
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : CI-Plastic
Elastomers : Buna-Nitrile
Voltage : 115 V
Phase : 1
Frequency : 60 Hz
Motor : Hermetically Sealed
Motor Amps : 6.8 A
Speed : 1725 RPM
Length : 10.2 "
Max Operating Temp : 104 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.5 "
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 2 %
Shaft : 416SS
Mechanical Seal : 6A
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Warranty : 1 Year/s
Applications : Contractor
Applications : Fountain
Applications : Pond
Applications : Sump
PH High : 8 pH
Other : Cord length 10ft, pump diamete
Read more…  
$26100
Non-automatic
Manufacturer: Power-Flo
Model Number: PF50-X
Maximum Flow : 65 gallons/min
TDH (Head) Maximum @ 0GPM : 12.99 PSI
Head (TDH) Maximum @ 0GPM : 30 FT
HP Standard : 0.5 HP
Watts : 0 W
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : CI-Plastic
Elastomers : Buna-Nitrile
Voltage : 115 V
Phase : 1
Frequency : 60 Hz
Motor : Hermetically Sealed
Motor Amps : 6.8 A
Speed : 1725 RPM
Length : 10.2 "
Max Operating Temp : 104 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.5 "
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 2 %
Shaft : 416SS
Mechanical Seal : 6A
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Warranty : 1 Year/s
Applications : Contractor
Applications : Fountain
Applications : Pond
Applications : Sump
PH High : 8 pH
Other : Cord length 10ft, pump diamete
Read more…  
$23800
Manufacturer: Power-Flo
Model Number: PF33A
Maximum Flow : 50 gallons/min
TDH (Head) Maximum @ 0GPM : 12.99 PSI
Head (TDH) Maximum @ 0GPM : 30 FT
HP Standard : 0.33 HP
Watts : 0 W
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : CI-Plastic
Elastomers : Buna-Nitrile
Voltage : 115 V
Phase : 1
Frequency : 60 Hz
Motor : Hermetically Sealed
Motor Amps : 5.8 A
Speed : 1725 RPM
Length : 11.7 "
Max Operating Temp : 104 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.5 "
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 2 %
Shaft : 416SS
Mechanical Seal : Type 6
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Warranty : 1 Year/s
Applications : Contractor
Applications : Fountain
Applications : Pond
Applications : Sump
PH High : 8 pH
Other : Cord length 10ft, pump diamete
Read more…  
$16600
Manufacturer: Power-Flo
Model Number: PF33VF-X
Maximum Flow : 50 gallons/min
TDH (Head) Maximum @ 0GPM : 12.99 PSI
Head (TDH) Maximum @ 0GPM : 30 FT
HP Standard : 0.33 HP
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : CI-Plastic
Elastomers : Buna-Nitrile
Voltage : 115 V
Phase : 1
Frequency : 60 Hz
Motor : Hermetically Sealed
Motor Amps : 5.8 A
Speed : 1725 RPM
Length : 11.7 "
MTR Cord Length : 20 FT
Max Operating Temp : 104 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.5 "
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 2 %
Shaft : 416SS
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Motor Bearings : Ball, oil lubricated
Impeller Mat'l / Type : Cast Iron, semi-open Vortex
Warranty : 2 Year/s
Applications : Contractor
Applications : Fountain
Applications : Pond
Applications : Sump
PH High : 8 pH
Other : Cord length 10ft, pump diamete
Approvals : cUL
Approvals : CSA
Read more…  
$26000
Manufacturer: Power-Flo
Model Number: PF33A-X
Maximum Flow : 50 gallons/min
TDH (Head) Maximum @ 0GPM : 12.99 PSI
Head (TDH) Maximum @ 0GPM : 30 FT
HP Standard : 0.33 HP
Watts : 0 W
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : CI-Plastic
Elastomers : Buna-Nitrile
Voltage : 115 V
Phase : 1
Frequency : 60 Hz
Motor : Hermetically Sealed
Motor Amps : 5.8 A
Speed : 1725 RPM
Length : 11.7 "
Max Operating Temp : 104 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.5 "
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 2 %
Shaft : 416SS
Mechanical Seal : Type 6
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Warranty : 1 Year/s
Applications : Contractor
Applications : Fountain
Applications : Pond
Applications : Sump
PH High : 8 pH
Other : Cord length 20ft, pump diamete
Read more…  
$17500
Manufacturer: Power-Flo
Model Number: PF33VF
Free Shipping, UPS grd
Maximum Flow : 50 gallons/min
TDH (Head) Maximum @ 0GPM : 12.99 PSI
Head (TDH) Maximum @ 0GPM : 30 FT
HP Standard : 0.33 HP
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : CI-Plastic
Elastomers : Buna-Nitrile
Voltage : 115 V
Phase : 1
Frequency : 60 Hz
Motor : Hermetically Sealed
Motor Amps : 5.8 A
Speed : 1725 RPM
Length : 11.7 "
MTR Cord Length : 10 FT
Max Operating Temp : 104 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.5 "
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 2 %
Shaft : 416SS
Mechanical Seal : 6A
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Motor Bearings : Ball, oil lubricated
Impeller Mat'l / Type : Cast Iron, semi-open Vortex
Warranty : 2 Year/s
Applications : Contractor
Applications : Fountain
Applications : Pond
Applications : Sump
PH High : 8 pH
Other : Cord length 10ft, pump diamete
Approvals : cUL
Approvals : CSA
Duty : Continuous
Read more…
Sale Price
$18500
Regular: $230.00
You Save: $45.00
Manufacturer: Power-Flo
Model Number: PF33
Maximum Flow : 65 gallons/min
TDH (Head) Maximum @ 0GPM : 10.82 PSI
Head (TDH) Maximum @ 0GPM : 25 FT
HP Standard : 0.33 HP
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : CI-Plastic
Voltage : 115 V
Phase : 1
Frequency : 60 Hz
Motor : TEFC
Motor Amps : 7.5 A
Speed : 3450 RPM
Max Operating Temp : 104 °F
Max. Particle Size : 0.5 "
Max. Volume of Suspended Solids : 0 %
Shaft : 316SS
Mechanical Seal : Single Mechanical
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Warranty : 2 Year/s
Applications : Submersible
Applications : Sump
PH High : 7 pH
Approvals : NEMA
Read more…  
$15500
Heavy Duty sump pump with DFC2 switch
Manufacturer: Power-Flo
Model Number: PF33DFC2
Maximum Flow : 65 gallons/min
TDH (Head) Maximum @ 0GPM : 10.82 PSI
Head (TDH) Maximum @ 0GPM : 25 FT
HP Standard : 0.33 HP
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : CI-Plastic
Elastomers : Buna-Nitrile
Voltage : 115 V
Phase : 1
Frequency : 60 Hz
Motor : TEFC
Motor Amps : 7.5 A
Speed : 3450 RPM
MTR Cord Length : 10 FT
Max Operating Temp : 104 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.5 "
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 5 %
Shaft : 316SS
Mechanical Seal : Single Mechanical
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Motor Bearings : Ball
Impeller Mat'l / Type : Thermoplastic, semi-open
Warranty : 2 Year/s
Applications : Submersible
Applications : Sump
PH High : 7 pH
Approvals : cUL
Duty : Continuous
Read more…  
$21000
Non-automatic
Manufacturer: Power-Flo
Model Number: PF33X
Maximum Flow : 65 gallons/min
TDH (Head) Maximum @ 0GPM : 10.82 PSI
Head (TDH) Maximum @ 0GPM : 25 FT
HP Standard : 0.33 HP
Watts : 0 W
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : CI-Plastic
Voltage : 115 V
Phase : 1
Frequency : 60 Hz
Motor : TEFC
Motor Amps : 7.5 A
Speed : 3450 RPM
Max Operating Temp : 104 °F
Max. Particle Size : 0.5 "
Max. Volume of Suspended Solids : 0 %
Shaft : 316SS
Mechanical Seal : Single Mechanical
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Warranty : 2 Year/s
Applications : Submersible
Applications : Sump
PH High : 7 pH
Read more…  
$16600
Jump to the first pageJump to the previous page Jump to the next pageJump to the last page
© 2000 - 2014 PumpBiz, Inc.  •  PumpBiz offers open accounts  •  All major credit cards accepted & PayPal  •  PumpBiz is a registered trademark of PumpBiz, Inc.