Tsurumi Submersible Pumps - Submersible Top discharge dewatering pumps provides maximum motor cooling efficiency allowing continuous duty operation at low water levels and extended dry-run capability. Dewatering Pump with rubber wear parts for maximum durability.
Use Dual Float Level Switch or FloodFree Switch with manual pump or any other pump.
Tsurumi LB models are designed for heavy duty dewatering pumping.
Tsurumi LS Dewatering Pump models are designed for pumping down to the floor for maximum drainage.
Tsurumi NK models are designed for heavy duty dewatering with abrasive or high discharge pressures. Use fully or partially submerged, indoors or outdoors.
- Urethane Semi Vortex Impeller maximum durably and maintaining pump performance.
- Double Inside Mechanical Seal with SiC faces provides the longest operation life.
- Oil Lifter provides lubrication of the seal faces.
- V-Ring Seal Protector protects mechanical seal from abrasive particles.
- Telephone & utility transformer vaults
- Fire cleaup, Basement floor sucker, Coffer dams
Manual 115V 2" 0.66HP
Manufacturer: Tsurumi Pumps
Model Number: LB-480 Dewatering Pump
Maximum Flow : 62 gallons/min
TDH (Head) Maximum @ 0GPM : 17 PSI
Head (TDH) Maximum @ 0GPM : 40 FT
GPM of Water @ 15 Ft. of Head : 50
GPM of Water @ 20 Ft. of Head : 42
GPM of Water @ 30 Ft. of Head : 22
HP Standard : 0.66 HP
Outlet Connection Type : MNPT
Outlet : 2 "
Wetted Materials : Aluminum
Wetted Materials : PolyPro-GF
Elastomers : Buna-Nitrile
Voltage : 115 V
Phase : 1
Frequency : 60 Hz
Motor : Hermetically Sealed
Motor Amps : 6.1 A
Speed : 3450 RPM
Length : 11 "
MTR Cord Length : 32 FT
Motor Cord Size : 16/3
Motor Insulation Class : E
Max Operating Temp : 130 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.25 "
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 5 %
Mechanical Seal Face : SiC
Mechanical Seal Type : Double
Motor Bearings : Ball
Impeller Mat'l / Type : 8.7 x 7.3 x 12 in
Warranty : 2 Year/s
Applications : Contractor
Applications : Dewatering
Applications : Portable
Applications : Submersible
Applications : Sump
PH High : 7 pH
Other : Max. Diameter (inch) : 7 5/16
Duty : Continuous
| Read more… |
$34700
ea.
|
1HP 115v
Manufacturer: Tsurumi Pumps
Model Number: LB-800 Submersible Dewatering Pump Heavy Duty
Maximum Flow : 81 gallons/min
TDH (Head) Maximum @ 0GPM : 26 PSI
Head (TDH) Maximum @ 0GPM : 60 FT
GPM of Water @ 15 Ft. of Head : 70
GPM of Water @ 30 Ft. of Head : 53
GPM of Water @ 40 Ft. of Head : 40
GPM of Water @ 50 Ft. of Head : 22
HP Standard : 1 HP
Outlet Connection Type : MNPT
Outlet : 2 "
Wetted Materials : CI-SS
Elastomers : Urethane
Voltage : 115 V
Phase : 1
Frequency : 60 Hz
Motor : Hermetically Sealed
Motor Amps : 10 A
Speed : 3450 RPM
Length : 13.5 "
MTR Cord Length : 50 FT
Motor Cord Size : 3/14
Motor Insulation Class : E
Max Operating Temp : 130 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.25 "
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 2 %
Shaft : 416SS
Mechanical Seal Face : SiC
Mechanical Seal Type : Double
Motor Bearings : Ball
Stages : 1
Impeller Mat'l / Type : Urethane Rubber, Semi-Vortex
Warranty : 2 Year/s
Applications : Contractor
Applications : Dewatering
Applications : Irrigation
Applications : Marine
Applications : Portable
Applications : Submersible
Applications : Sump
PH High : 7 pH
Other : Max. Diameter (inch) : 7 1/2"
Locked Rotor Amps : 40 A
Country of Origin : Japan
Duty : Continuous
| Read more… |
$52800
ea.
|
2HP 115v
Manufacturer: Tsurumi Pumps
Model Number: LB-1500 Submersible Dewatering Pump Heavy Duty
Maximum Flow : 73 gallons/min
TDH (Head) Maximum @ 0GPM : 29 PSI
Head (TDH) Maximum @ 0GPM : 68 FT
GPM of Water @ 15 Ft. of Head : 100
GPM of Water @ 30 Ft. of Head : 82
GPM of Water @ 40 Ft. of Head : 70
GPM of Water @ 50 Ft. of Head : 50
HP Standard : 2 HP
Outlet Connection Type : MNPT
Outlet : 3 "
Wetted Materials : CI-SS
Elastomers : Urethane
Voltage : 115 V
Phase : 1
Frequency : 60 Hz
Motor : Hermetically Sealed
Motor Amps : 26 A
Speed : 3450 RPM
Length : 13.5 "
MTR Cord Length : 50 FT
Motor Cord Size : 3/14
Motor Insulation Class : E
Max Operating Temp : 130 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.25 "
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 2 %
Shaft : 416SS
Mechanical Seal Face : SiC
Mechanical Seal Type : Double
Motor Bearings : Ball
Stages : 1
Impeller Mat'l / Type : Urethane Rubber, Semi-Vortex
Warranty : 2 Year/s
Applications : Contractor
Applications : Dewatering
Applications : Irrigation
Applications : Marine
Applications : Portable
Applications : Submersible
Applications : Sump
PH High : 7 pH
Other : Max. Diameter (inch) : 7 1/2"
Locked Rotor Amps : 40 A
Country of Origin : Japan
Duty : Continuous
| Read more… |
$179000
ea.
|
115v 45GPM 2,700GPH 2/3HP
Manufacturer: Tsurumi Pumps
Model Number: LSC1.4S-61 Floor Sucker Pump
Maximum Flow : 45 gallons/min
TDH (Head) Maximum @ 0GPM : 17 PSI
Head (TDH) Maximum @ 0GPM : 40 FT
GPM of Water @ 10 Ft. of Head : 40
GPM of Water @ 20 Ft. of Head : 31
GPM of Water @ 30 Ft. of Head : 20
HP Standard : 0.66 HP
Outlet Connection Type : MNPT
Outlet : 0.75 "
Wetted Materials : CI
Wetted Materials : PolyPro-GF
Elastomers : Buna-Nitrile
Voltage : 115 V
Phase : 1
Frequency : 60 Hz
Motor : Hermetically Sealed
Motor Amps : 6.1 A
Speed : 3450 RPM
Length : 12.5 "
MTR Cord Length : 32 FT
Motor Cord Size : 16/3
Max Operating Temp : 104 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.25 "
Max. Particle Hardness : 4 MOH
Max. Volume of Suspended Solids : 2 %
Mechanical Seal Face : SiC
Mechanical Seal Type : Double
Motor Bearings : Ball
Stages : 1
Impeller Mat'l / Type : Urethane rubber, semi-vortex
Warranty : 2 Year/s
Applications : Contractor
Applications : Dewatering
Applications : Portable
Applications : Submersible
Applications : Sump
PH High : 7 pH
Other : Max. Diameter (inch) : 9 1/8,
Country of Origin : Japan
Duty : Continuous submerged or not.
| Read more… |
Sale Price
|
$38900
ea.
|
115v 62GPM 3,720GPH 2/3HP
Manufacturer: Tsurumi Pumps
Model Number: LSR2.4S-61
Maximum Flow : 62 gallons/min
TDH (Head) Maximum @ 0GPM : 17 PSI
Head (TDH) Maximum @ 0GPM : 40 FT
GPM of Water @ 15 Ft. of Head : 50
GPM of Water @ 20 Ft. of Head : 42
GPM of Water @ 30 Ft. of Head : 23
HP Standard : 0.66 HP
Outlet Connection Type : MNPT
Outlet : 2 "
Wetted Materials : PolyPro-GF
Elastomers : Urethane
Voltage : 115 V
Phase : 1
Frequency : 60 Hz
Motor : Hermetically Sealed
Motor Amps : 6.1 A
Speed : 3450 RPM
Length : 11.97 "
MTR Cord Length : 32 FT
Motor Cord Size : 16/3
Max Operating Temp : 104 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.25 "
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 2 %
Mechanical Seal Face : SiC
Mechanical Seal Type : Double
Motor Bearings : Ball
Stages : 1
Warranty : 2 Year/s
Applications : Contractor
Applications : Dewatering
Applications : Portable
Applications : Submersible
Applications : Sump
PH High : 7 pH
Other : Max. Diameter (inch) : 7 5/16
Country of Origin : Japan
Duty : Continuous
| Read more… |
Sale Price
|
$39800
ea.
|
Auto, 115V, 2", 0.66HP
Manufacturer: Tsurumi Pumps
Model Number: LB-480A Industrial Sump pump
Maximum Flow : 62 gallons/min
TDH (Head) Maximum @ 0GPM : 17 PSI
Head (TDH) Maximum @ 0GPM : 40 FT
GPM of Water @ 15 Ft. of Head : 50
GPM of Water @ 20 Ft. of Head : 42
GPM of Water @ 30 Ft. of Head : 22
HP Standard : 0.66 HP
Outlet Connection Type : MNPT
Outlet : 2 "
Wetted Materials : Aluminum
Wetted Materials : PolyPro-GF
Elastomers : Buna-Nitrile
Voltage : 115 V
Phase : 1
Frequency : 60 Hz
Motor : Hermetically Sealed
Motor Amps : 6.2 A
Speed : 3450 RPM
Length : 12 "
MTR Cord Length : 32 FT
Motor Cord Size : 16/3
Motor Insulation Class : E
Max Operating Temp : 130 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.25 "
Max. Particle Hardness : 7 MOH
Max. Volume of Suspended Solids : 5 %
Mechanical Seal Face : SiC
Mechanical Seal Type : Double
Motor Bearings : Ball
Stages : 1
Impeller Mat'l / Type : Urethane, semi open
Warranty : 2 Year/s
Applications : Contractor
Applications : Dewatering
Applications : Portable
Applications : Submersible
Applications : Sump
PH High : 7 pH
Other : Max. Diameter (inch) : 8 3/4
Duty : Continuous
| Read more… |
$45000
ea.
|
230v High Flow Submersible Dewatering
Manufacturer: Tsurumi Pumps
Model Number: NK2-22L
Maximum Flow : 180 gallons/min
Head (TDH) Maximum @ 0GPM : 60 FT
HP Standard : 3 HP
Outlet Connection Type : MNPT
Outlet : 3 "
Wetted Materials : Aluminum
Wetted Materials : PolyPro-GF
Elastomers : Buna-Nitrile
Voltage : 230 V
Phase : 1
Frequency : 60 Hz
Motor : Hermetically Sealed
Motor Amps : 13 A
Speed : 3450 RPM
Length : 24.5 "
MTR Cord Length : 32 FT
Motor Cord Size : 3/14
Motor Insulation Class : B
Max Operating Temp : 130 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.33 "
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 20 %
Shaft : 416SS
Mechanical Seal Face : SiC
Mechanical Seal Type : Double
Motor Bearings : Ball
Impeller Mat'l / Type : Ductile Iron, semi-vortex
Warranty : 2 Year/s
Applications : Contractor
Applications : Dewatering
Applications : Fountain
Applications : Irrigation
Applications : Marine
Applications : Portable
Applications : Submersible
Applications : Sump
PH High : 8 pH
Other : Max. Diameter: 9 7/16" , Cont
Locked Rotor Amps : 70 A
Country of Origin : Japan
Duty : Continuous
| Read more… |
$260900
ea.
|
Manufacturer: Tsurumi Pumps
Model Number: NK2-15
Maximum Flow : 110 gallons/min
TDH (Head) Maximum @ 0GPM : 30.3 PSI
Head (TDH) Maximum @ 0GPM : 70 FT
HP Standard : 2 HP
Outlet Connection Type : MNPT
Outlet : 3 "
Wetted Materials : Aluminum
Wetted Materials : PolyPro-GF
Elastomers : Buna-Nitrile
Voltage : 115/230 V
Phase : 1
Frequency : 60 Hz
Motor : Hermetically Sealed
Motor Amps : 22 / 11.5 A
Speed : 3450 RPM
Length : 24.5 "
MTR Cord Length : 32 FT
Motor Cord Size : 14/3
Max Operating Temp : 130 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.33 "
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 20 %
Shaft : 416SS
Mechanical Seal Face : SiC
Mechanical Seal Type : Double
Impeller Mat'l / Type : Semi-vortex
Warranty : 2 Year/s
Applications : Contractor
Applications : Dewatering
Applications : Fountain
Applications : Marine
Applications : Portable
Applications : Submersible
Applications : Sump
PH High : 8 pH
Other : Max. Diameter: 9 7/16" , Cont
| Read more… |
Sale Price
|
$177400
ea.
|
Manufacturer: Tsurumi Pumps
Model Number: NK2-22
Maximum Flow : 130 gallons/min
TDH (Head) Maximum @ 0GPM : 36.8 PSI
Head (TDH) Maximum @ 0GPM : 85 FT
HP Standard : 3 HP
Outlet Connection Type : MNPT
Outlet : 3 "
Wetted Materials : Aluminum
Wetted Materials : PolyPro-GF
Elastomers : Buna-Nitrile
Voltage : 230 V
Phase : 1
Frequency : 60 Hz
Motor : Hermetically Sealed
Motor Amps : 13 A
Speed : 3450 RPM
Length : 24.5 "
Max Operating Temp : 130 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.33 "
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 20 %
Shaft : 416SS
Mechanical Seal Face : SiC
Mechanical Seal Type : Double
Warranty : 2 Year/s
Applications : Contractor
Applications : Dewatering
Applications : Fountain
Applications : Irrigation
Applications : Marine
Applications : Portable
Applications : Submersible
Applications : Sump
PH High : 8 pH
Other : Max. Diameter: 9 7/16" , Cont
| Read more… |
$215200
ea.
|
1HP 230v/1
Manufacturer: Tsurumi Pumps
Model Number: LB-800 230V
Maximum Flow : 73 gallons/min
TDH (Head) Maximum @ 0GPM : 26 PSI
Head (TDH) Maximum @ 0GPM : 60 FT
GPM of Water @ 15 Ft. of Head : 70
GPM of Water @ 25 Ft. of Head : 60
GPM of Water @ 40 Ft. of Head : 40
GPM of Water @ 50 Ft. of Head : 22
HP Standard : 1 HP
Outlet Connection Type : MNPT
Outlet : 2 "
Wetted Materials : CI-SS
Elastomers : Urethane
Voltage : 230 V
Phase : 1
Frequency : 60 Hz
Motor : Hermetically Sealed
Motor Amps : 5.3 A
Speed : 3450 RPM
Length : 16.25 "
MTR Cord Length : 50 FT
Motor Cord Size : 3/14
Motor Insulation Class : E
Max Operating Temp : 130 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.25 "
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 2 %
Shaft : 416SS
Mechanical Seal Face : SiC
Mechanical Seal Type : Double
Motor Bearings : Ball
Impeller Mat'l / Type : Urethane, semi-open
Warranty : 2 Year/s
Applications : Contractor
Applications : Dewatering
Applications : Irrigation
Applications : Marine
Applications : Portable
Applications : Submersible
Applications : Sump
PH High : 7 pH
Other : Max. Diameter (inch) : 7 1/2"
Locked Rotor Amps : 22 A
Country of Origin : Japan
Duty : Continuous
| Read more… |
$52800
ea.
|



