For pumphead only models (30520-3xxx) select NEMA 145TC Frame C-Face motor rated a 1 1/2 hp at 1750 RPM with appropriate service factor. Motor must handle high axial loads. Front ball bearing locked against axial movement is recommended. Motor must deliver 4.8 ft-lbs and 11.2 ft-lbs torque minimum in forward and reverse directions respectively. Use only capacitor start motors.
For pedestal mount models (30510-1xxx) operating at 1750 RPM, select 1 1/2 hp or 3 hp motor for standard or high pressure impellers, respectively, with and appropriate service factor. For high prssure impellers, the motor must supply 7.9 ft-lbs or 16.3 ft-lbs of torque minimum for foward and reverse operation respectively.
Rated flow is based on Neoprene impeller pumping water. Reduce rated flow 10% for Nitrile,Viton, and EPDM standard impellers. Reduce rated flow 15% for Nitrile, Viton, and EPDM high pressure impellers.
| Read more… |
$137600
ea.
|
| Read more… |
$156800
ea.
|
| Read more… |
$119600
ea.
|
| Read more… |
$131675
ea.
|
| Read more… |
$179400
ea.
|
| Read more… |
$105570
ea.
|
| Read more… |
$109250
ea.
|
| Read more… |
$85560
ea.
|
| Read more… |
$105685
ea.
|
| Read more… |
$131675
ea.
|



