Jabsco’s range of sliding vane pumps are used in road construction machinery and equipment Diesel Refuelling Pumps. These transfer pumps offer a convenient alternative for applications calling for a self priming, highly responsive, and environmentally friendly pump component. Transfer pumps - reliability has been proven over many years on vehicles and equipment used in tough environments such as the road construction, power generation, forestry, and agriculture.
Manufacturer: Jabsco Pumps
Model Number: VR050-1022
Maximum Flow : 13 gallons/min
TDH (Head) Maximum @ 0GPM : 14.29 PSI
Head (TDH) Maximum @ 0GPM : 33 FT
HP Standard : 0.16 HP
Inlet Connection Type : Barb
Inlet : 0.98 "
Outlet Connection Type : Barb
Outlet : 0.98 "
Wetted Materials : Aluminum
Wetted Materials : PPS-Ryton
Elastomers : Buna-Nitrile
Voltage : 12DC V
Motor : TENV
Speed : 1725 RPM
Self Priming : 1
Suction Lift : 6 FT
Max Operating Temp : 104 °F
Viscosity : SAE 10 oil 88.00 cp 500.00 ssu
Max. Volume of Suspended Solids : 0 %
Shaft : Steel
Mechanical Seal : Lip Type
Mechanical Seal Type : Single
Warranty : 1 Year/s
Applications : Contractor
Applications : Fuel Oil
Applications : Marine
PH High : 7 pH
Other : 25 minute duty cycle. Suction
| Read more… |
$41000
ea.
|
12vdc
Manufacturer: Jabsco Pumps
Model Number: 23870-1200
Maximum Flow : 9 gallons/min
TDH (Head) Maximum @ 0GPM : 8.66 PSI
Head (TDH) Maximum @ 0GPM : 20 FT
HP Standard : 0.16 HP
Inlet Connection Type : Barb
Inlet : 0.75 "
Outlet Connection Type : Barb
Outlet : 0.75 "
Wetted Materials : Aluminum
Wetted Materials : PPS-Ryton
Elastomers : Buna-Nitrile
Voltage : 12DC V
Motor : TENV
Speed : 1725 RPM
Self Priming : 1
Suction Lift : 6 FT
Max Operating Temp : 104 °F
Viscosity : SAE 10 oil 88.00 cp 500.00 ssu
Max. Volume of Suspended Solids : 0 %
Shaft : Steel
Mechanical Seal : Lip Type
Mechanical Seal Type : Single
Warranty : 1 Year/s
Applications : Contractor
Applications : Fuel Oil
Applications : Marine
PH High : 7 pH
Other : 25 minute duty cycle. Suction
| Read more… |
$21000
ea.
|
115v
Manufacturer: Jabsco Pumps
Model Number: 18685-0000
Maximum Flow : 8 gallons/min
TDH (Head) Maximum @ 0GPM : 9 PSI
Head (TDH) Maximum @ 0GPM : 20 FT
HP Standard : 0.125 HP
Inlet Connection Type : FNPT
Inlet : 0.5 "
Outlet Connection Type : FNPT
Outlet : 0.5 "
Wetted Materials : Bronze
Elastomers : Buna-Nitrile
Voltage : 115 V
Phase : 1
Frequency : 60 Hz
Motor : TENV
Motor Amps : 3.1 A
Speed : 3450 RPM
MTR Cord Length : 6 FT
Self Priming : 1
Suction Lift : 5 FT
Max Operating Temp : 104 °F
Viscosity : SAE 10 oil 88.00 cp 500.00 ssu
Max. Volume of Suspended Solids : 0 %
Shaft : 416SS
Mechanical Seal : Lip Type
Mechanical Seal Type : Single
Impeller Mat'l / Type : Teflon filled Ryton
Warranty : 1 Year/s
Applications : Contractor
Applications : Fuel Oil
Applications : Marine
PH High : 7 pH
Other : Suction strainer 300 micron re
Duty : Continuous
| Read more… |
$62200
ea.
|
Manufacturer: Jabsco Pumps
Model Number: VR100-1122
Maximum Flow : 26 gallons/min
TDH (Head) Maximum @ 0GPM : 21.21 PSI
Head (TDH) Maximum @ 0GPM : 49 FT
HP Standard : 0.16 HP
Inlet Connection Type : Barb
Inlet : 1.3 "
Outlet Connection Type : Barb
Outlet : 1.3 "
Wetted Materials : Aluminum
Wetted Materials : PPS-Ryton
Elastomers : Buna-Nitrile
Voltage : 24DC V
Motor : TENV
Speed : 1725 RPM
Self Priming : 1
Suction Lift : 6 FT
Max Operating Temp : 122 °F
Viscosity : SAE 10 oil 88.00 cp 500.00 ssu
Max. Volume of Suspended Solids : 0 %
Shaft : Steel
Mechanical Seal : Lip Type
Mechanical Seal Type : Single
Warranty : 1 Year/s
Applications : Contractor
Applications : Fuel Oil
Applications : Marine
PH High : 7 pH
Other : 25 minute duty cycle. Suction
| Read more… |
$68000
ea.
|



