Commercial Duty Water Puppy has 25% more flow than the standard model and a heavy duty PMDC 12 or 24 vdc motor. For general transfer pumping where self-priming, 8 gpm flow and debris tolerance are required. Oil-resistant nitrile impeller is standard. Do not pump gasoline or other flammable liquids.
Complies with USCG 183.410 marine ignition protection. DO NOT RUN DRY. SALE!!!!
12v
Manufacturer: Jabsco Pumps
Model Number: 18670-0123
Maximum Flow : 8 gallons/min
TDH (Head) Maximum @ 0GPM : 9 PSI
Head (TDH) Maximum @ 0GPM : 20 FT
Inlet Connection Type : FNPT
Inlet : 0.5 "
Outlet Connection Type : FNPT
Outlet : 0.5 "
Wetted Materials : Bronze
Elastomers : Buna-Nitrile
Voltage : 12DC V
Motor : TENV
Motor Amps : 11.5 A
Speed : 2850 RPM
Length : 6.88 "
Self Priming : 1
Suction Lift : 6 FT
Max Operating Temp : 180 °F
Viscosity : Cream 16.50 cp 100.00 ssu
Max. Particle Size : 0.1 "
Max. Particle Hardness : 1 MOH
Max. Volume of Suspended Solids : 1 %
Mechanical Seal : Lip seal
Mechanical Seal Type : Single
Warranty : 1 Year/s
Applications : Flooded Suction
Applications : Coolant
Applications : Cooling
Applications : Fuel Oil
Applications : Marine
Applications : Self-Priming
PH High : 7 pH
Other : permanent magnet motor with ba
| Read more… |
$27500
ea.
|
24v
Manufacturer: Jabsco Pumps
Model Number: 18670-0943
Maximum Flow : 8 gallons/min
TDH (Head) Maximum @ 0GPM : 9 PSI
Head (TDH) Maximum @ 0GPM : 20 FT
Inlet Connection Type : FNPT
Inlet : 0.5 "
Outlet Connection Type : FNPT
Outlet : 0.5 "
Wetted Materials : Bronze
Elastomers : Buna-Nitrile
Voltage : 24DC V
Motor : TENV
Speed : 2850 RPM
Length : 6.88 "
Self Priming : 1
Suction Lift : 6 FT
Max Operating Temp : 180 °F
Viscosity : Cream 16.50 cp 100.00 ssu
Max. Particle Size : 0.1 "
Max. Volume of Suspended Solids : 1 %
Mechanical Seal : Lip seal
Mechanical Seal Type : Single
Warranty : 1 Year/s
Applications : Flooded Suction
Applications : Coolant
Applications : Cooling
Applications : Fuel Oil
Applications : Marine
Applications : Self-Priming
PH High : 7 pH
Other : permanent magnet motor with ba
| Read more… |
$28600
ea.
|



