High Head (ME3H) and High Flow (ME3F) Submersible Effluent Pumps. Durable motor delivers years of reliable service. Engineered for maintenance-free operation.
- Oil-filled 1550 RPM motor for maximum heat dissipation and continuous bearing lubrication.
- Models with a P denotes piggy-backed MECHANICAL FLOAT controls for fully automatic operation.
- Models without the P denotes that it can be plugged directly into grounded receptacles for manual operation.
- Overload protected, shaded pole motor eliminates starting switches and relays which are prone to fail.
- Heavy cast iron motor housing and volute case dissipate heat, allow motor to run cooler for extended life.
- Field tested, wide angle, mercury-free mechanical float switch for maximum draw down. (Automatic piggy-back models only).
- Automatic pump models can be operated manually by unplugging piggy-back switch and plugging pump directly into outlet.
- Passes full 3/4” solids
- ME3H: recessed impeller
- ME3F: enclosed 2 vane impeller
- UL, CSA and SSPMA listed.
- Handles domestic effluent and drain water, not raw sewage.
- See the Miscellaneous Page for information (click here)
- Min. Sump Dia.:
- Simplex: 24 in.
- Duplex: 36 in.
Manufacturer: Myers APLEX Water Pumps
Model Number: ME3F-11P
Maximum Flow : 66 gallons/min
TDH (Head) Maximum @ 0GPM : 13.42 PSI
Head (TDH) Maximum @ 0GPM : 31 FT
TDH Minimum : 5
HP Standard : 0.33 HP
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : CI-Plastic
Elastomers : Buna-Nitrile
Voltage : 115 V
Phase : 1
Frequency : 60 Hz
Motor : Hermetically Sealed
Motor Amps : 12 A
Max Operating Temp : 140 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.75 "
Max Specific Gravity : 1.1 sp. gr.
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 5 %
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Double
Warranty : 1 Year/s
Applications : Submersible
Applications : Sump
PH High : 9 pH
| Read more… |
$38700
ea.
|
Manufacturer: Myers APLEX Water Pumps
Model Number: ME3F-21P
Maximum Flow : 66 gallons/min
TDH (Head) Maximum @ 0GPM : 13.42 PSI
Head (TDH) Maximum @ 0GPM : 31 FT
TDH Minimum : 5
HP Standard : 0.33 HP
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : CI-Plastic
Elastomers : Buna-Nitrile
Voltage : 230 V
Phase : 1
Frequency : 60 Hz
Motor : Hermetically Sealed
Motor Amps : 6 A
Max Operating Temp : 140 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.75 "
Max Specific Gravity : 1.1 sp. gr.
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 5 %
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Double
Warranty : 1 Year/s
Applications : Submersible
Applications : Sump
PH High : 9 pH
| Read more… |
$38100
ea.
|
Manufacturer: Myers APLEX Water Pumps
Model Number: ME3F-11
Maximum Flow : 66 gallons/min
TDH (Head) Maximum @ 0GPM : 13.42 PSI
Head (TDH) Maximum @ 0GPM : 31 FT
TDH Minimum : 5
HP Standard : 0.33 HP
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : CI-Plastic
Elastomers : Buna-Nitrile
Voltage : 115 V
Phase : 1
Frequency : 60 Hz
Motor : Hermetically Sealed
Motor Amps : 12 A
Max Operating Temp : 140 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.75 "
Max Specific Gravity : 1.1 sp. gr.
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 5 %
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Double
Warranty : 1 Year/s
Applications : Submersible
Applications : Sump
PH High : 9 pH
| Read more… |
$35100
ea.
|
Manufacturer: Myers APLEX Water Pumps
Model Number: ME3F-21
Maximum Flow : 66 gallons/min
TDH (Head) Maximum @ 0GPM : 13.42 PSI
Head (TDH) Maximum @ 0GPM : 31 FT
TDH Minimum : 5
HP Standard : 0.33 HP
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : CI-Plastic
Elastomers : Buna-Nitrile
Voltage : 230 V
Phase : 1
Frequency : 60 Hz
Motor : Hermetically Sealed
Motor Amps : 6 A
Max Operating Temp : 140 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.75 "
Max Specific Gravity : 1.1 sp. gr.
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 5 %
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Double
Warranty : 1 Year/s
Applications : Sewage
Applications : Submersible
Applications : Sump
PH High : 9 pH
| Read more… |
$37700
ea.
|
Manufacturer: Myers APLEX Water Pumps
Model Number: ME3H-21P
Maximum Flow : 36 gallons/min
TDH (Head) Maximum @ 0GPM : 15.15 PSI
Head (TDH) Maximum @ 0GPM : 35 FT
TDH Minimum : 10
HP Standard : 0.33 HP
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : CI-Plastic
Elastomers : Buna-Nitrile
Voltage : 230 V
Phase : 1
Frequency : 60 Hz
Motor : Hermetically Sealed
Motor Amps : 6 A
Max Operating Temp : 140 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.75 "
Max Specific Gravity : 1.1 sp. gr.
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 5 %
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Double
Warranty : 1 Year/s
Applications : High Pressure
Applications : Submersible
Applications : Sump
PH High : 9 pH
| Read more… |
$37100
ea.
|
Model Number: ME3H-11P
Maximum Flow : 36 gallons/min
TDH (Head) Maximum @ 0GPM : 15.15 PSI
Head (TDH) Maximum @ 0GPM : 35 FT
TDH Minimum : 10
HP Standard : 0.33 HP
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : CI-Plastic
Elastomers : Buna-Nitrile
Voltage : 115 V
Phase : 1
Frequency : 60 Hz
Motor : Hermetically Sealed
Motor Amps : 12 A
Max Operating Temp : 140 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.75 "
Max Specific Gravity : 1.1 sp. gr.
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 5 %
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Double
Warranty : 1 Year/s
Applications : High Pressure
Applications : Submersible
Applications : Sump
PH High : 9 pH
| Read more… |
$38100
ea.
|
Manufacturer: Myers APLEX Water Pumps
Model Number: ME3H-11
Maximum Flow : 36 gallons/min
TDH (Head) Maximum @ 0GPM : 15.15 PSI
Head (TDH) Maximum @ 0GPM : 35 FT
TDH Minimum : 10
HP Required : 0.33 HP
HP Standard : 0.33 HP
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : CI-Plastic
Elastomers : Buna-Nitrile
Voltage : 115 V
Phase : 1
Frequency : 60 Hz
Motor : Hermetically Sealed
Motor Amps : 12 A
Max Operating Temp : 140 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.75 "
Max Specific Gravity : 1.1 sp. gr.
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 5 %
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Double
Warranty : 1 Year/s
Applications : High Pressure
Applications : Submersible
Applications : Sump
PH High : 9 pH
| Read more… |
$35100
ea.
|
Manufacturer: Myers APLEX Water Pumps
Model Number: ME3H-21
Maximum Flow : 36 gallons/min
TDH (Head) Maximum @ 0GPM : 15.15 PSI
Head (TDH) Maximum @ 0GPM : 35 FT
TDH Minimum : 10
HP Standard : 0.33 HP
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : CI-Plastic
Elastomers : Buna-Nitrile
Voltage : 230 V
Phase : 1
Frequency : 60 Hz
Motor : Hermetically Sealed
Motor Amps : 6 A
Max Operating Temp : 140 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.75 "
Max Specific Gravity : 1.1 sp. gr.
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 5 %
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Double
Warranty : 1 Year/s
Applications : High Pressure
Applications : Submersible
Applications : Sump
PH High : 9 pH
| Read more… |
$35000
ea.
|



