Pumpbiz

Ask Henry - Interactive Pump Selector
Contact Us:

1-800-PUMPBIZ
1-800(786-7249)

Live Chat
PumpU
Hot Buys

Pump News

A quick and easy way to unload trucks

Pumps for acids are often used to unload trucks carrying chemical products or IBC containers. But the problem when dealing with trucks is that they often don't have an electric box with …

Read More


FREEPUMPS

Every month pumpbiz plans to give out a free pump to someone in need. Head over to http://freepumps.com and submit your story.  We will contact the person with the most compelling story at the …

Read More


Propane BI-FUEL upgrade Kit

 Trucks, cars, and other vehicles as well as other Small engines running on our propane conversion systems have been proven to have 80% cleaner emissions and help the engine last longer than …

Read More


Centrifugal pump vertical. Using rare-earth Neodymium magnets, VERTIMAG achieves a truly sealless, vertical pump design free of wetted shaft bearings. A centrifugal pump completely sealed, air tight column and the absence of a secondary / back impeller prevent aeration (virtually eliminating micro-bubbles in PCB plating aplications) and the release of fugitive environmental emissions. VERTIMAG answers conventional vertical pump applications within a wide range of operating conditions. The patented VERTIMAG is a durable performer with low maintenance requirements. Features
  • Magnetic drive
  • Non-aerating
  • Reduced environmental emissions
  • No wetted shaft bearings
  • Mounts inside or outside of tank
  • Polypropylene or PVDF construction
  • Accepts standard NEMA or IEC motors
  • Modular build: in 6" increments from 12" (30cm) to 60" (152cm)
  • Up to 1.8 specific gravity
  • Single impeller with sealed column prevents aeration
  • Fluid is safely pumped without releasing fumes
  • Available in VKC Series 5.5,6,8,10,and 11 Polypro vertical magdrive pump. Same great design features of the popular horizontal KC pumps, but in a vertical design. Great for intank mounting typical in plating and fume scrubbers. Units come in various 6" incremental lengths.

    For optional PVC mounting plate (9.5" x 14") add $87.00. 01287663 01287689 01287705 01287721 01287747 01287754 01287762 01287770 01287804 01287804 0187812 01287838 01287846 01287861 01287903 01287929

Jump to the first pageJump to the previous page Jump to the next pageJump to the last page
Manufacturer: Finish Thompson FTI Chemical & Drum Pumps
Model Number: VKC6P12CVVN315C02
Maximum Flow : 40 gallons/min
Minimum Flow : 1 gallons/min
TDH (Head) Maximum @ 0GPM : 20.35 PSI
Head (TDH) Maximum @ 0GPM : 47 FT
TDH Minimum : 5
Head @ BEP : 25 FT
Head @ BEP PSI : 10.82 psi
HP Required : 0.5 HP
HP Standard : 0.5 HP
Inlet Connection Type : FNPT
Inlet : 1 "
Outlet Connection Type : MNPT
Outlet : 0.75 "
Wetted Materials : PolyPro-GF
Elastomers : Viton
Voltage : 115/208-230 V
Phase : 1
Frequency : 50/60  Hz
Motor : TEFC
Speed : 3450 RPM
Motor Frame : 56C
Length : 12 "
Self Priming : 0
Max Operating Temp : 180 °F
Viscosity : Cream 16.50 cp 100.00 ssu
Max. Particle Size : 0.12 "
Max Specific Gravity : 1.2 sp. gr.
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 5 %
Shaft : Ceramic
Mechanical Seal Type : Double
Pump Bearing : Carbon/graphite
Impeller Size (see curve image) : 3.1
Applications : Chemical
Applications : Parts Washer
Applications : Plating
Applications : Sump
PH High : 13 pH
Other : Mounting plate is optional.
Read more…  
$67900
Manufacturer: Finish Thompson FTI Chemical & Drum Pumps
Model Number: VKC6P18CVVN315C02
Maximum Flow : 40 gallons/min
Minimum Flow : 1 gallons/min
TDH (Head) Maximum @ 0GPM : 20.35 PSI
Head (TDH) Maximum @ 0GPM : 47 FT
TDH Minimum : 5
Head @ BEP : 25 FT
Head @ BEP PSI : 10.82 psi
HP Required : 0.5 HP
HP Standard : 0.5 HP
Inlet Connection Type : FNPT
Inlet : 1 "
Outlet Connection Type : MNPT
Outlet : 0.75 "
Wetted Materials : PolyPro-GF
Elastomers : Viton
Voltage : 115/208-230 V
Phase : 1
Frequency : 50/60  Hz
Motor : TEFC
Speed : 3450 RPM
Motor Frame : 56C
Length : 18 "
Self Priming : 0
Max Operating Temp : 180 °F
Viscosity : Cream 16.50 cp 100.00 ssu
Max. Particle Size : 0.12 "
Max Specific Gravity : 1.2 sp. gr.
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 5 %
Shaft : Ceramic
Mechanical Seal Type : Double
Pump Bearing : Carbon/graphite
Impeller Size (see curve image) : 3.1
Applications : Chemical
Applications : Parts Washer
Applications : Plating
Applications : Sump
PH High : 13 pH
Other : Mounting plate is optional.
Read more…  
$77900
Manufacturer: Finish Thompson FTI Chemical & Drum Pumps
Model Number: VKC6P12CVVN315C03
Maximum Flow : 33 gallons/min
Minimum Flow : 1 gallons/min
TDH (Head) Maximum @ 0GPM : 16.88 PSI
Head (TDH) Maximum @ 0GPM : 39 FT
TDH Minimum : 5
Head @ BEP : 25 FT
Head @ BEP PSI : 10.82 psi
HP Standard : 0.5 HP
Inlet Connection Type : FNPT
Inlet : 1 "
Outlet Connection Type : MNPT
Outlet : 0.75 "
Wetted Materials : PolyPro-GF
Elastomers : Viton
Voltage : 230/460 V
Phase : 3
Frequency : 50/60  Hz
Motor : TEFC
Speed : 3450 RPM
Motor Frame : 56C
Length : 12 "
Self Priming : 0
Max Operating Temp : 140 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.12 "
Max Specific Gravity : 1.4 sp. gr.
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 1 %
Shaft : Ceramic
Mechanical Seal Type : Double
Pump Bearing : Carbon/graphite
Impeller Size (see curve image) : 3.19
Warranty : 1 Year/s
Applications : Chemical
Applications : Parts Washer
Applications : Plating
Applications : Sump
PH High : 13 pH
Other : 9.5" x 14" PVC Mounting plate
Read more…  
$75800
Jump to the first pageJump to the previous page Jump to the next pageJump to the last page
© 2000 - 2014 PumpBiz, Inc.  •  PumpBiz offers open accounts  •  All major credit cards accepted & PayPal  •  PumpBiz is a registered trademark of PumpBiz, Inc.