Mody pump line of industrial submersible drainage and non-clog pumps are used in the severest of applications: from construction sites, mines, power stations, steel plants, ships to sewage, food screening and waste water treatment industries.
The in-house computerized state-of-the-art test bed ensures total quality control & unsurpassed reliability built into the entire range of pumps. Mody industries is ISO 9002 certified.
- Tandem Tungsten Carbide/Tungsten Carbide & Tungsten Carbide/Tungsten Carbide mechanical seals wholly enclosed in a pressure compensated oil bag.
- Built-in automatic ON/OFF/ON thermal overload switches & over current
relay protect the motor. Thermal Protectors
wired directly to built-in contactor for maximum reliability. - Equipped with moisture sensor that detects progressive
seal wear and automatically shuts down the pump.
- Can be equipped with sacrificial Zinc anodes for maximum life in a saline fluid environment.
- Continuous rated 'F' Class; triple-dipped & epoxied heavy-duty motors available in any voltage & frequency combinations.
- Flows from 30 GPM to 1800 GPM.
- Discharge Heads from 5' to 250'.
- Available from 1.3 HP to 35 HP.
- Single row deep groove upper bearing. Double angular contact lower bearings.
The bearings are enclosed with high temperature grease-containing special
anti-corrosion additive. - Power Cable is Waterproof/oil-proof, rubber-insulated, neoprene-sheathed
copper conductor flexible
cable, 50' length. -
Stainless Steel strainer with 1.18" x .37 " rectangular holes.
 |
 |
 |
 |
 |
 |
 |
 |
||||||
|
|
|
|
|
|
|
|
||||||
