Steep Operating Characteristics
Near-constant deliveries are maintained over wide variations in load. High shut-off pressure overcomes temporary line resistance.
Canned Motor
Zero Leakage Sealless Design.
Ends down time and maintenance problems associated with mechanical seals. Environmentally safe double containment.
Reverse Circulation Port All pumps are equipped with a reverse circulation port for use in circumstances where volatile fluids are being pumped, or where substantial amounts of entrained vapors are expected in the fluid. Particularly useful with intermittent duty applications where vapor build up occurs during off cycles. The reverse circulation port allows venting of built up vapors that could otherwise cause a dry running bearing condition which could substantially reduce service life.
Self-Adjusting Impeller
A hydrodynamic film on each side of the impeller positions it for long life.
The impeller exerts no thrust load on bearings. Pump operates equally well in
a vertical or horizontal position.
Mechanical Seals
Bronze fitted pumps have Buna N elastomers, high temperature carbon, and ceramic
seats for best hot water service. Optional seats and materials are also available.
300# Case Working Pressure
Rigid structure is designed for maximum casing strength.
100% Tested
Every pump is fully tested to verify performance prior to shipment.
Volatile Fluid Handling
Turbine impeller handles vapors up to 20% by volume, minimizing the possibility
of vapor locks.
”O”Ring Gaskets
“O”ring seals are used throughout the T41 series pumps to assure sealing
and ease of service.
Shaft Sleeve
Units up to three horsepower have a shaft sleeve under the mechanical seal.
Larger units have a 316 stainless steel shaft with an impeller sleeve.
Water Flinger
A water flinger provides added protection to ball bearings in the event of seal
leakage.
Simple Construction
T41 series pumps contain only three major components, allowing for easy service.
End Suction • Top Discharge
T41 Series pumps fit into small spaces easily. Discharge can be rotated in 90
degree, 180 degree and 270 degree positions.
Best Efficiency
New pump design optimizes efficiency for each size.
Non-Cavitating
T41 series pumps may be operated under adverse inlet conditions without audible
or measurable cavation.
Low NPSH
New inlet design provides superior fluid handling ability at low head inlet
conditions.burks aroura
