Ask Henry - Interactive Pump Selector
Contact Us:


Hot Buys

Pump News

State of the art Float switches

PumpBiz offers modern Electronic float switches that no longer have problem causing moving parts. Features include alarms, lights,phone calls and alternators. They are easy to install and fit just …

Read More

Propane BI-FUEL upgrade Kit

Trucks, cars, and other vehicles as well as other Small engines running on our propane conversion systems have been proven to have 80% cleaner emissions and help the engine last longer than those …

Read More

Flex Pump™ Dewatering Trash

Submersible Trash pump engine powered*. Flex-Pump is a submersible dewatering pump without electricity. Customers who have used it are so impressed they are calling it a "Muddy …

Read More

The Oasis Water Pump is used primarily on wells, cisterns, springs, buried tanks, rivers or streams where maximum lift (distance to water) does not exceed 28-30 feet (9 meters) unless using deep well model. Like old fashion hand water pump. Use in-place of a pitcher pump. These mighty pumps will actually pump 1/3 more volume than a conventional hand pump of the same size.

With its rugged, sturdy, engineering thermoplastic construction the Oasis Pump is ideal for campsites, summer homes, stock water, bilge, rural dwellings, parks, bilge, picnic areas, plant nurseries, test wells, villages or remote locations. Will not rust, corrode or wear. Cup is made of a polyester elastomer which will not distort, wear or dry out.

Model No. W1 - A conventional hand pump for general purpose pumping applications open discharge.

Model No. WP2 - A pressure version of the W1 with pressure capability. Will plumb directly to standard PVC pipe (solvent weld) or adapt to hose, etc. 0-20lbs. normal operating pressure, up to 50 ft. head.

Discharge 1 1/2 in. Suction 2 in. Height 18 in. Weight 4 pounds. Diameter 3 1/2 in. (3 in. I.D. cylinder). Resistant to salt water, most chemicals. Up to 10 gallons per minute. Maximum Lift (distance to water) 30 ft.

Jump to the first pageJump to the previous page Jump to the next pageJump to the last page
Manufacturer: PumpBiz Pumps
Model Number: WP2
Maximum Flow : 10 gallons/min
TDH (Head) Maximum @ 0GPM : 21.65 PSI
Head (TDH) Maximum @ 0GPM : 50 FT
Inlet Connection Type : FNPT
Inlet : 2 "
Outlet : 1.5 "
Wetted Materials : PolyPro
Elastomers : Buna-Nitrile
Diaphragm : Urethane
Length : 18 "
Self Priming : 1
Suction Lift : 28 FT
Max Operating Temp : 120 °F
Max. Particle Size : 0 "
Max. Particle Hardness : 1 MOH
Max. Volume of Suspended Solids : 0 %
Shaft : 304SS
Mechanical Seal Type : Double
Warranty : 1 Year/s
Applications : Chemical
Applications : Contractor
Applications : Drum
Applications : Hand
Applications : Marine
Applications : Portable
Applications : Self-Priming
Applications : Well
PH High : 7 pH
Other : For smaller size suction conne
Manufacturer: PumpBiz Pumps
Model Number: WP2D DC280
Maximum Flow : 10 gallons/min
TDH (Head) Maximum @ 0GPM : 12.99 PSI
Head (TDH) Maximum @ 0GPM : 30 FT
Outlet : 1.5 "
Wetted Materials : 304SS
Wetted Materials : Brass
Wetted Materials : PVC
Max. Volume of Suspended Solids : 0 %
Mechanical Seal Type : Double
Applications : Hand
Applications : Well
PH High : 7 pH
Read more…  
Jump to the first pageJump to the previous page Jump to the next pageJump to the last page
© 2000 - 2015 PumpBiz, Inc.  •  PumpBiz offers open accounts  •  All major credit cards accepted & PayPal  •  PumpBiz is a registered trademark of PumpBiz, Inc.