Pumpbiz

Ask Henry - Interactive Pump Selector
Contact Us:

1-800-PUMPBIZ
1-800(786-7249)

Live Chat
PumpU
Hot Buys

Pump News

A quick and easy way to unload trucks

Pumps for acids are often used to unload trucks carrying chemical products or IBC containers. But the problem when dealing with trucks is that they often don't have an electric box with …

Read More


FREEPUMPS

Every month pumpbiz plans to give out a free pump to someone in need. Head over to http://freepumps.com and submit your story.  We will contact the person with the most compelling story at the …

Read More


Propane BI-FUEL upgrade Kit

 Trucks, cars, and other vehicles as well as other Small engines running on our propane conversion systems have been proven to have 80% cleaner emissions and help the engine last longer than …

Read More


OPERATION: The 6800 is designed to operate with a PSW Tank Shut-Off Switch for hydro-pneumatic storage systems. The PSW, when used with a typical under-counter R.O. system, can be augmented with an ESO Electronic Shut-Off Valve. It is also compatible with most hydraulic shut-off valves. For counter-top systems, Aquatec's TLC Tank Level Control Switch Valve shut off feed water and the pump when the product water storage tank is full. Designed as an accessory for Reverse Osmosis RO Units in areas with water pressure less than 40 PSI. This pump is quiet, easy to install, and can significatly increase water output. Used on Culigan RO systems.
POWER: Pumps operate with low energy (only 14 watts), low voltage (12-24 volt) motors, powered with compatible transformers with world wide primary voltages available (100 VAC, 120 VAC, 230 VAC). Transformers are optional and must be ordered in addition to the pump.
FITTINGS: Built-in 1/4" John Guest half cartridge fittings eliminate need for external fittings (unless elbows are required); 1/4" Jaco straight, 1/4" Jaco elbow fittings, or 8mm stem adapters for metric tubing are optionaly available.

Distinguishing Features

  • Toughest, most durable pump on market
  • Adjustable max. outlet psi (regardless of feed pressure)
  • Expels trapped air (no more air locks)
  • Can be mounted w/pump head up or down
  • More flow at extremely low inlet pressures
  • New motor venting system to remove moisture
  • EMI/RFI electronic noise suppression
  • 100% final performance tested

Key Operating Benefits

  • Boosts pressure 40 to 120 psi (adjustable)
  • Fixed pressure to 160 psi
  • Up to 30,000+ operating hours
  • Whisper quiet - less than 45 DBA
  • Can run dry without damage
  • Self-priming - 60" lift
  • Low voltage (12-24V) for maximum safety 115v transformer available.
  • Corrosion resistant exterior
  • Continuous or intermittent operation
Jump to the first pageJump to the previous page Jump to the next pageJump to the last page
Manufacturer: Aquatec Electric diaphragm Pumps
Model Number: 6840-2J03-B201
Maximum Flow : 1.9 gallons/min
TDH (Head) Maximum @ 0GPM : 109.96 PSI
Head (TDH) Maximum @ 0GPM : 254 FT
Inlet : 0.25 "
Outlet : 0.25 "
Wetted Materials : Nylon
Elastomers : EPDM
Diaphragm : Santoprene
Voltage : 24DC V
Phase : 1
Motor : TENV
Motor Amps : 1.5 A
Length : 7.5 "
Self Priming : 1
Suction Lift : 3 FT
Max Operating Temp : 170 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0 "
Max. Volume of Suspended Solids : 0 %
Mechanical Seal Type : Double
Warranty : 1 Year/s
Applications : Constant Pressure
Applications : Flooded Suction
Applications : Self-Priming
PH High : 7 pH
Read more…  
$19900
Manufacturer: Aquatec Electric diaphragm Pumps
Model Number: 6840-2J03-B331
Maximum Flow : 1.9 gallons/min
TDH (Head) Maximum @ 0GPM : 109.96 PSI
Head (TDH) Maximum @ 0GPM : 254 FT
Inlet : 0.25 "
Outlet : 0.25 "
Wetted Materials : Nylon
Elastomers : EPDM
Diaphragm : Santoprene
Voltage : 115 V
Phase : 1
Motor : TENV
Motor Amps : 1.5 A
Length : 7.5 "
Self Priming : 1
Suction Lift : 3 FT
Max Operating Temp : 170 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0 "
Max. Volume of Suspended Solids : 0 %
Mechanical Seal Type : Double
Warranty : 1 Year/s
Applications : Constant Pressure
Applications : Flooded Suction
Applications : Self-Priming
PH High : 7 pH
Read more…  
$19900
Manufacturer: Aquatec Electric diaphragm Pumps
Model Number: 6840-2J03-C221
Maximum Flow : 1.9 gallons/min
TDH (Head) Maximum @ 0GPM : 109.96 PSI
Head (TDH) Maximum @ 0GPM : 254 FT
Inlet : 0.25 "
Outlet : 0.25 "
Wetted Materials : Nylon
Elastomers : EPDM
Diaphragm : Santoprene
Voltage : 115 V
Phase : 1
Motor : TENV
Motor Amps : 1.5 A
Length : 7.5 "
Self Priming : 1
Suction Lift : 3 FT
Max Operating Temp : 170 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0 "
Max. Volume of Suspended Solids : 0 %
Mechanical Seal Type : Double
Warranty : 1 Year/s
Applications : Constant Pressure
Applications : Flooded Suction
Applications : Self-Priming
PH High : 7 pH
Read more…  
$19900
Manufacturer: Aquatec Electric diaphragm Pumps
Model Number: 6840-2JM3-B221
Maximum Flow : 1.9 gallons/min
TDH (Head) Maximum @ 0GPM : 109.96 PSI
Head (TDH) Maximum @ 0GPM : 254 FT
Inlet : 0.25 "
Outlet : 0.25 "
Wetted Materials : Nylon
Elastomers : EPDM
Diaphragm : Santoprene
Voltage : 115 V
Phase : 1
Motor : TENV
Motor Amps : 1.5 A
Length : 7.5 "
Self Priming : 1
Suction Lift : 3 FT
Max Operating Temp : 170 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0 "
Max. Volume of Suspended Solids : 0 %
Mechanical Seal Type : Double
Warranty : 1 Year/s
Applications : Constant Pressure
Applications : Flooded Suction
Applications : Self-Priming
PH High : 7 pH
Read more…  
$19900
Manufacturer: Aquatec Electric diaphragm Pumps
Model Number: 6840-2P01-B221
Maximum Flow : 1.9 gallons/min
TDH (Head) Maximum @ 0GPM : 109.96 PSI
Head (TDH) Maximum @ 0GPM : 254 FT
Inlet : 0.25 "
Outlet : 0.25 "
Wetted Materials : Nylon
Elastomers : EPDM
Diaphragm : Santoprene
Voltage : 115 V
Phase : 1
Motor : TENV
Motor Amps : 1.5 A
Length : 7.5 "
Self Priming : 1
Suction Lift : 3 FT
Max Operating Temp : 170 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0 "
Max. Volume of Suspended Solids : 0 %
Mechanical Seal Type : Double
Warranty : 1 Year/s
Applications : Constant Pressure
Applications : Flooded Suction
Applications : Self-Priming
PH High : 7 pH
Read more…  
$19900
Manufacturer: Aquatec Electric diaphragm Pumps
Model Number: 6840-2J03-A331
Maximum Flow : 0.7 gallons/min
TDH (Head) Maximum @ 0GPM : 80 PSI
Head (TDH) Maximum @ 0GPM : 184.8 FT
Inlet : 0.25 "
Outlet : 0.25 "
Wetted Materials : Nylon
Elastomers : EPDM
Diaphragm : Santoprene
Voltage : 115 V
Phase : 1
Motor : TENV
Length : 7.5 "
Self Priming : 1
Suction Lift : 3 FT
Max Operating Temp : 170 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0 "
Max. Particle Hardness : 0 MOH
Max. Volume of Suspended Solids : 0 %
Mechanical Seal Type : Double
Applications : Constant Pressure
Applications : Flooded Suction
Applications : Self-Priming
PH High : 7 pH
Other : Some assembly required into sy
Read more…  
$19900
Manufacturer: Aquatec Electric diaphragm Pumps
Model Number: 8851-2P01-S424
Maximum Flow : 0.25 gallons/min
TDH (Head) Maximum @ 0GPM : 171.43 PSI
Head (TDH) Maximum @ 0GPM : 396 FT
Inlet : 0.38 "
Outlet : 0.38 "
Wetted Materials : Nylon
Elastomers : EPDM
Diaphragm : Santoprene
Motor : TENV
Length : 7.5 "
Self Priming : 1
Suction Lift : 3 FT
Max Operating Temp : 140 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0 "
Max. Volume of Suspended Solids : 0 %
Mechanical Seal Type : Double
Applications : Constant Pressure
Applications : Flooded Suction
Applications : Self-Priming
PH High : 7 pH
Other : Some assembly required into sy
Read more…  
$19900
Manufacturer: Aquatec Electric diaphragm Pumps
Model Number: 8851-2J03-B424
Maximum Flow : 0.25 gallons/min
TDH (Head) Maximum @ 0GPM : 171.43 PSI
Head (TDH) Maximum @ 0GPM : 396 FT
Inlet : 0.375 "
Outlet : 0.375 "
Wetted Materials : Nylon
Elastomers : EPDM
Diaphragm : Santoprene
Motor : TENV
Length : 7.5 "
Self Priming : 1
Suction Lift : 3 FT
Max Operating Temp : 140 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0 "
Max. Volume of Suspended Solids : 0 %
Mechanical Seal Type : Double
Applications : Flooded Suction
Applications : Constant Pressure
Applications : Self-Priming
PH High : 7 pH
Other : Some assembly required into sy
Read more…  
$19900
Manufacturer: Aquatec Electric diaphragm Pumps
Model Number: 8851-2P01-S421
Maximum Flow : 0.25 gallons/min
TDH (Head) Maximum @ 0GPM : 171.43 PSI
Head (TDH) Maximum @ 0GPM : 396 FT
Inlet : 0.25 "
Outlet : 0.25 "
Wetted Materials : Nylon
Elastomers : EPDM
Diaphragm : Santoprene
Motor : TENV
Length : 7.5 "
Self Priming : 1
Suction Lift : 3 FT
Max Operating Temp : 140 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0 "
Max. Volume of Suspended Solids : 0 %
Mechanical Seal Type : Double
Applications : Flooded Suction
Applications : Constant Pressure
Applications : Self-Priming
PH High : 7 pH
Other : Some assembly required into sy
Read more…  
$19900
Manufacturer: Aquatec Electric diaphragm Pumps
Model Number: 8841-2J03-B421
Maximum Flow : 1.9 gallons/min
TDH (Head) Maximum @ 0GPM : 109.96 PSI
Head (TDH) Maximum @ 0GPM : 254 FT
Inlet : 0.25 "
Outlet : 0.25 "
Wetted Materials : Nylon
Elastomers : EPDM
Diaphragm : Santoprene
Voltage : 115 V
Phase : 1
Motor : TENV
Motor Amps : 1.5 A
Length : 7.5 "
Self Priming : 1
Suction Lift : 3 FT
Max Operating Temp : 170 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0 "
Max. Volume of Suspended Solids : 0 %
Mechanical Seal Type : Double
Warranty : 1 Year/s
Applications : Constant Pressure
Applications : Flooded Suction
Applications : Self-Priming
PH High : 7 pH
Read more…  
$21000
Jump to the first pageJump to the previous page Jump to the next pageJump to the last page
© 2000 - 2014 PumpBiz, Inc.  •  PumpBiz offers open accounts  •  All major credit cards accepted & PayPal  •  PumpBiz is a registered trademark of PumpBiz, Inc.