AMT IPT Self-priming Centrifugal pumps is designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing. Electric pumps feature self-cleaning clog resistant impeller capable of handling up to 3/8" diameter semi-solids. Built in Flapper / Check valves enable consistent self-priming to 20 feet.
Stainless Steel (-98) models are especially effective in applications when rust and/or corrosion can develop in systems and also are highly resistant to erosion and chemicals. Cast Iron models offer durability, high quality and value that continue to set the standard in the industry.
1.5" and 2" models from 1/2 to 3 HP. All pumps have easy access fill and drain plugs and are available with TEFC or ODP close coupled 56J electric motors or with a pedestal only. Made in USA unlike other brands 4UA...
3HP, 230/460v, CI, ODP
Manufacturer: AMT Trash Pump Centrifugal Pumps
Model Number: 2766-95
Maximum Flow : 150 gallons/min
TDH (Head) Maximum @ 0GPM : 43.29 PSI
Head (TDH) Maximum @ 0GPM : 100 FT
HP Standard : 3 HP
Inlet Connection Type : FNPT
Inlet : 2 "
Outlet Connection Type : FNPT
Outlet : 2 "
Wetted Materials : CI
Elastomers : Buna-Nitrile
Voltage : 230/460 V
Phase : 3
Frequency : 60 Hz
Motor : ODP
Motor Amps : 9/5 A
Speed : 3450 RPM
Motor Frame : 56J thrd
MTR Cord Length : 0 FT
Self Priming : 1
Suction Lift : 20 FT
Max Operating Temp : 180 °F
Viscosity : Vegetable Oil 34.60 cp 200.00
Max. Particle Size : 0.37 "
Max. Particle Hardness : 8 MOH
Max. Volume of Suspended Solids : 2 %
Shaft : 416SS
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Impeller No. (see curve image) : A
Impeller Mat'l / Type : Cast Iron, semi-open
Rotation : CW facing motor side Drive End
Warranty : 1 Year/s
Applications : Dewatering
Applications : Fountain
Applications : Pond
Applications : Self-Priming
Applications : Slurry, Slush & Sludge
PH High : 8 pH
Country of Origin : USA, buy American
Duty : Continuous
Drain Plug : Yes x2
Shaft Size : 0.625 inch
| Read more… |
$77550
ea.
|
115/230v 1-1/2HP ODP
Manufacturer: AMT Trash Pump Centrifugal Pumps
Model Number: 2821-95 Self-priming
Maximum Flow : 100 gallons/min
TDH (Head) Maximum @ 0GPM : 42 PSI
Head (TDH) Maximum @ 0GPM : 98 FT
GPM of Water @ 30 Ft. of Head : 82
GPM of Water @ 40 Ft. of Head : 75
GPM of Water @ 60 Ft. of Head : 55
GPM of Water @ 80 Ft. of Head : 25
HP Standard : 1.5 HP
Inlet Connection Type : FNPT
Inlet : 1.5 "
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : CI
Elastomers : Buna-Nitrile
Voltage : 115/230 V
Phase : 1
Frequency : 60 Hz
Motor : ODP
Motor Amps : 16/8 A
Speed : 3450 RPM
Motor Frame : 56J thrd
MTR Cord Length : 0 FT
Self Priming : 1
Suction Lift : 20 FT
Max Operating Temp : 180 °F
Viscosity : Vegetable Oil 34.60 cp 200.00
Max. Particle Size : 0.37 "
Max. Volume of Suspended Solids : 0 %
Shaft : 416SS
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Motor Bearings : Ball
Impeller No. (see curve image) : E
Impeller Mat'l / Type : Cast Iron, Semi-Open
Warranty : 1 Year/s
Applications : Dewatering
Applications : Self-Priming
Country of Origin : USA, Born in America
Duty : Continuous
Drain Plug : Yes
| Read more… |
$58850
ea.
|
115/230v 3/4HP TEFC
Manufacturer: AMT Trash Pump Centrifugal Pumps
Model Number: 282D-98 Stainless self priming pump
Maximum Flow : 57 gallons/min
TDH (Head) Maximum @ 0GPM : 25.97 PSI
Head (TDH) Maximum @ 0GPM : 60 FT
HP Standard : 0.75 HP
Inlet Connection Type : FNPT
Inlet : 1.5 "
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : 316SS
Elastomers : Viton
Voltage : 115/230 V
Phase : 1
Frequency : 60 Hz
Motor : TEFC
Motor Amps : 9/5 A
Speed : 3450 RPM
Motor Frame : 56J thrd
Length : 17.6 "
MTR Cord Length : 0 FT
Self Priming : 1
Suction Lift : 20 FT
Max Operating Temp : 200 °F
Viscosity : Vegetable Oil 34.60 cp 200.00
Max. Particle Size : 0.37 "
Max. Volume of Suspended Solids : 2 %
Shaft : 416SS
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Motor Bearings : Ball
Impeller No. (see curve image) : G
Impeller Mat'l / Type : Stainless Steel, Semi-Open
Warranty : 1 Year/s
Applications : Chemical
Applications : Coolant
Applications : Contractor
Applications : Dewatering
Applications : Fountain
Applications : Irrigation
Applications : Marine
Applications : Parts Washer
Applications : Plating
Applications : Pond
Applications : Self-Priming
Applications : Solvent
PH High : 11 pH
Other : Steel base and handle.
Country of Origin : USA, Buy American
Drain Plug : Yes
| Read more… |
$107250
ea.
|
230/460v 2HP ODP
Manufacturer: AMT Trash Pump Centrifugal Pumps
Model Number: 2763-98
Maximum Flow : 128 gallons/min
TDH (Head) Maximum @ 0GPM : 36.36 PSI
Head (TDH) Maximum @ 0GPM : 84 FT
HP Standard : 2 HP
Inlet Connection Type : FNPT
Inlet : 2 "
Outlet Connection Type : FNPT
Outlet : 2 "
Wetted Materials : 316SS
Elastomers : Viton
Voltage : 230/460 V
Phase : 3
Frequency : 60 Hz
Motor : ODP
Motor Amps : 7/4 A
Speed : 3450 RPM
Motor Frame : 56J thrd
MTR Cord Length : 0 FT
Self Priming : 1
Suction Lift : 20 FT
Max Operating Temp : 200 °F
Viscosity : Vegetable Oil 34.60 cp 200.00
Max. Particle Size : 0.37 "
Max. Particle Hardness : 6 MOH
Max. Volume of Suspended Solids : 2 %
Shaft : 416SS
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Motor Bearings : Ball
Impeller No. (see curve image) : B
Impeller Mat'l / Type : Stainless Steel, Semi-Open
Warranty : 1 Year/s
Applications : Contractor
Applications : Dewatering
Applications : Fountain
Applications : Irrigation
Applications : Parts Washer
Applications : Self-Priming
PH High : 7 pH
Other : Steel mounting base and handle
Country of Origin : USA, Born in America
Drain Plug : Yes
| Read more… |
$147950
ea.
|
115/230v 1-1/2HP ODP 6480GPH
Manufacturer: AMT Trash Pump Centrifugal Pumps
Model Number: 2762-95 Electric pump
Maximum Flow : 115 gallons/min
TDH (Head) Maximum @ 0GPM : 36 PSI
Head (TDH) Maximum @ 0GPM : 83 FT
HP Standard : 1.5 HP
Inlet Connection Type : FNPT
Inlet : 2 "
Outlet Connection Type : FNPT
Outlet : 2 "
Wetted Materials : CI
Elastomers : Buna-Nitrile
Voltage : 115/230 V
Phase : 1
Frequency : 60 Hz
Motor : ODP
Motor Amps : 16/8 A
Speed : 3450 RPM
Motor Frame : 56J thrd
Length : 18.3 "
MTR Cord Length : 0 FT
Self Priming : 1
Suction Lift : 20 FT
Max Operating Temp : 180 °F
Viscosity : Vegetable Oil 34.60 cp 200.00
Max. Particle Size : 0.37 "
Max. Particle Hardness : 6 MOH
Max. Volume of Suspended Solids : 2 %
Shaft : 416SS
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Motor Bearings : Ball
Impeller No. (see curve image) : C
Impeller Mat'l / Type : Cast Iron, Semi-Open
Warranty : 1 Year/s
Applications : Dewatering
Applications : Fountain
Applications : Irrigation
Applications : Parts Washer
Applications : Pond
Applications : Self-Priming
Other : Steel base and handle.
Country of Origin : USA, Buy American
Drain Plug : Yes
| Read more… |
$95700
ea.
|
115/230v 2HP ODP 7,500 GPH
Manufacturer: AMT Trash Pump Centrifugal Pumps
Model Number: 2761-95 self priming pump
Maximum Flow : 118 gallons/min
TDH (Head) Maximum @ 0GPM : 35 PSI
Head (TDH) Maximum @ 0GPM : 82 FT
HP Standard : 2 HP
Inlet Connection Type : FNPT
Inlet : 2 "
Outlet Connection Type : FNPT
Outlet : 2 "
Wetted Materials : CI
Elastomers : Buna-Nitrile
Voltage : 115/230 V
Phase : 1
Frequency : 60 Hz
Motor : ODP
Motor Amps : 28/14 A
Speed : 3450 RPM
Motor Frame : 56J thrd
Length : 19.1 "
MTR Cord Length : 0 FT
Self Priming : 1
Suction Lift : 20 FT
Max Operating Temp : 180 °F
Viscosity : Vegetable Oil 34.60 cp 200.00
Max. Particle Size : 0.37 "
Max. Particle Hardness : 6 MOH
Max. Volume of Suspended Solids : 2 %
Shaft : 416SS
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Motor Bearings : Ball
Impeller No. (see curve image) : B
Impeller Mat'l / Type : Stainless Steel, Semi-Open
Warranty : 1 Year/s
Applications : Contractor
Applications : Dewatering
Applications : Fountain
Applications : Irrigation
Applications : Parts Washer
Applications : Self-Priming
PH High : 7 pH
Other : Steel base and handle.
Approvals : ETL
Country of Origin : USA, Buy American
Duty : Continous
Drain Plug : Yes
| Read more… |
$69850
ea.
|
1.5HP, 115/230v, ODP
Manufacturer: AMT Trash Pump Centrifugal Pumps
Model Number: 2762-98
Maximum Flow : 115 gallons/min
TDH (Head) Maximum @ 0GPM : 36 PSI
Head (TDH) Maximum @ 0GPM : 83 FT
HP Standard : 1.5 HP
Inlet Connection Type : FNPT
Inlet : 2 "
Outlet Connection Type : FNPT
Outlet : 2 "
Wetted Materials : 316SS
Elastomers : Viton
Voltage : 115/230 V
Phase : 1
Frequency : 60 Hz
Motor : ODP
Motor Amps : 16/8 A
Speed : 3450 RPM
Motor Frame : 56J thrd
Length : 18.3 "
MTR Cord Length : 0 FT
Self Priming : 1
Suction Lift : 20 FT
Max Operating Temp : 200 °F
Viscosity : Vegetable Oil 34.60 cp 200.00
Max. Particle Size : 0.37 "
Max. Particle Hardness : 6 MOH
Max. Volume of Suspended Solids : 2 %
Shaft : 416SS
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Motor Bearings : Ball
Impeller No. (see curve image) : C
Impeller Mat'l / Type : 316SS, semi-open
Rotation : CW facing motor side Drive End
Warranty : 1 Year/s
Applications : Chemical
Applications : Dewatering
Applications : Fountain
Applications : Irrigation
Applications : Parts Washer
Applications : Pond
Applications : Self-Priming
PH High : 10 pH
Other : Steel base and handle.
Country of Origin : USA
Duty : Continuous
Drain Plug : yes, x2
Shaft Size : 0.625 inch
| Read more… |
Sale Price
|
$104800
ea.
|
2HP 230/460v TEFC
Manufacturer: AMT Trash Pump Centrifugal Pumps
Model Number: 276D-95
Maximum Flow : 110 gallons/min
TDH (Head) Maximum @ 0GPM : 35 PSI
Head (TDH) Maximum @ 0GPM : 82 FT
Head @ BEP : 47 FT
Head @ BEP PSI : 20 psi
HP Standard : 2 HP
Inlet Connection Type : FNPT
Inlet : 2 "
Outlet Connection Type : FNPT
Outlet : 2 "
Wetted Materials : CI
Wetted Materials : 304SS
Elastomers : Buna-Nitrile
Voltage : 230/460 V
Phase : 3
Frequency : 60/50 Hz
Motor : TEFC
Motor Amps : 6/3 A
Speed : 3450 RPM
Motor Frame : 56J thrd
Length : 17.6 "
MTR Cord Length : 0 FT
Self Priming : 1
Suction Lift : 20 FT
Max Operating Temp : 180 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.37 "
Max. Volume of Suspended Solids : 2 %
Shaft : 416SS
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Motor Bearings : Ball
Impeller No. (see curve image) : C
Impeller Mat'l / Type : Stainless steel, semi-open clog resistant
Warranty : 1 Year/s
Applications : Chemical
Applications : Coolant
Applications : Contractor
Applications : Dewatering
Applications : Fountain
Applications : Irrigation
Applications : Marine
Applications : Parts Washer
Applications : Plating
Applications : Pond
Applications : Self-Priming
Applications : Solvent
PH High : 11 pH
Other : Steel base and handle. Max. wo
Country of Origin : USA, Buy American
Duty : Continuous
Drain Plug : Yes
Shaft Size : 0.625 inch
| Read more… |
$90750
ea.
|
230/460v 3HP TEFC
Manufacturer: AMT Trash Pump Centrifugal Pumps
Model Number: 276C-95
Maximum Flow : 130 gallons/min
TDH (Head) Maximum @ 0GPM : 35.5 PSI
Head (TDH) Maximum @ 0GPM : 82 FT
Head @ BEP : 47 FT
Head @ BEP PSI : 20.35 psi
HP Standard : 3 HP
Inlet Connection Type : FNPT
Inlet : 2 "
Outlet Connection Type : FNPT
Outlet : 2 "
Wetted Materials : CI
Elastomers : Buna-Nitrile
Voltage : 230/460 V
Phase : 3
Frequency : 60 Hz
Motor : TEFC
Motor Amps : 8/4 A
Speed : 3450 RPM
Motor Frame : 56J thrd
Length : 17.6 "
MTR Cord Length : 0 FT
Self Priming : 1
Suction Lift : 20 FT
Max Operating Temp : 180 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.37 "
Max. Volume of Suspended Solids : 2 %
Shaft : 416SS
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Motor Bearings : Ball
Impeller No. (see curve image) : B
Impeller Mat'l / Type : Stainless Steel, Semi-Open
Warranty : 1 Year/s
Applications : Chemical
Applications : Coolant
Applications : Contractor
Applications : Dewatering
Applications : Fountain
Applications : Irrigation
Applications : Marine
Applications : Parts Washer
Applications : Plating
Applications : Pond
Applications : Self-Priming
Applications : Solvent
PH High : 11 pH
Other : Steel base and handle.
Country of Origin : USA, Born in America
Drain Plug : Yes
| Read more… |
$95260
ea.
|
Manufacturer: AMT Trash Pump Centrifugal Pumps
Model Number: 2825-K5
Maximum Flow : 79 gallons/min
TDH (Head) Maximum @ 0GPM : 34.2 PSI
Head (TDH) Maximum @ 0GPM : 79 FT
Inlet Connection Type : FNPT
Inlet : 1.5 "
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : CI
Elastomers : Viton
Speed : 3450 RPM
Motor Frame : 56J thrd
Self Priming : 1
Suction Lift : 20 FT
Max Operating Temp : 180 °F
Viscosity : Vegetable Oil 34.60 cp 200.00
Max. Particle Size : 0.37 "
Max. Particle Hardness : 6 MOH
Max. Volume of Suspended Solids : 2 %
Mechanical Seal Face : SiC
Mechanical Seal Type : Single
Applications : Dewatering
Applications : Fountain
Applications : Fuel Oil
Applications : Irrigation
Applications : Parts Washer
Applications : Self-Priming
PH High : 7 pH
Other : Steel base and handle.
| Read more… |
$32500
ea.
|



