Acid pump Solvent pump.
Oil-filled cast aluminum submersible pump for use with stoddard solvent and deodorized kerosene submerged parts washer applications only. Sealed unit has double-lip Viton seal and nylon volute with 1/4" MNPT discharge. 6 foot power cord without plug has "Master Builders" conduit fitting at pump housing for mounting. For pumping unheated metal parts cleaning solvent which is UL classified as PJQU, as described in the Gas and Oil Equipment Directory. For use in UL listed parts washers. These refined petroleum distillates are free from tendency to heat spontaneously; they have a closed cup flash point not lower than 100 degrees F. Thermally protected.
- Oil-filled Aluminum Housing
- Nylon volute & impeller
- Conduit fitting for mounting
- Submerged use only in parts washers
- Double-lip Viton shaft seal
- For use with UL (PJQU) solvents
- 300 GPH @ 1
- 6 foot cord, no plug
- Thermally protected
 |
 |
 |
 |
 |
 |
 |
 |
||||||
|
|
|
|
|
|
|
|
||||||
