Pumpbiz

Ask Henry - Interactive Pump Selector
Contact Us:

1-800-PUMPBIZ
1-800(786-7249)

Live Chat
PumpU
Hot Buys

Pump News

A quick and easy way to unload trucks

Pumps for acids are often used to unload trucks carrying chemical products or IBC containers. But the problem when dealing with trucks is that they often don't have an electric box with …

Read More


FREEPUMPS

Every month pumpbiz plans to give out a free pump to someone in need. Head over to http://freepumps.com and submit your story.  We will contact the person with the most compelling story at the …

Read More


Propane BI-FUEL upgrade Kit

 Trucks, cars, and other vehicles as well as other Small engines running on our propane conversion systems have been proven to have 80% cleaner emissions and help the engine last longer than …

Read More


MTH M Multistage Regenerative Turbine Sealless Canned Pumps. Used for chillers, machine tool coolants and other high pressure applications involving clean liquids. PERFORMANCE RANGE:
Capacities from 1 to 40 GPM, Head pressures to 3500 Feet, higher capacities and pressures available through the use of a Variable Frequency Drive up to 90Hz. See individual T31, T41, T51, M50/L50 Series mechanical seal curves for initial sealless pump selection.

ELECTRICAL RANGE:
Three Phase 1/2HP to 8HP, 3450/2880 RPM (60Hz/50Hz), 190-240 volt(Optional variable frequency range 40Hz-90Hz.): Single phase 1/3 to 3/4HP, 3450/2880 RPM (60Hz/50Hz), 180-240 volt. Consult factory for availability of 460V units.

TYPICAL CONSTRUCTION: 316 Stainless Steel wetted components with Viton O-rings are standard, with other alloys and sealing materials available by special order.

STATOR INSULATION:
Six inch 3 phase 1/2HP to 8HP Motors utilize Class C insulation suitable to handle liquids from -120°F to +302°F (-84.4°C to +150°C). Four inch 1 phase 1/3HP to 3/4HP Motors utilize Class F insulation suitable to handle liquids from -120°F to +194°F (-84.4°C to 90°C).

BEARING MATERIALS:
Carbon-Graphite material selected for liquid compatibility and wear resistance.

MOUNTING OPTIONS:
Most models available in vertical or horizontal mounting configuration with NPT, SAE, BSP, ISO Threaded ports or ANSI standard flanges. Suction and Discharge ports may be rotated in 90 degree increments.
Jump to the first pageJump to the previous page Jump to the next pageJump to the last page
Manufacturer: MTH Turbine Pump
Model Number: M52M-BF
Maximum Flow : 12 gallons/min
TDH (Head) Maximum @ 0GPM : 300 PSI
Head (TDH) Maximum @ 0GPM : 693 FT
HP Standard : 7.5 HP
Inlet Connection Type : FNPT
Inlet : 1.25 "
Outlet Connection Type : FNPT
Outlet : 1.25 "
Wetted Materials : CI
Wetted Materials : Bronze
Voltage : 460 V
Phase : 3
Speed : 3450 RPM
Viscosity : Water 1.00 cp 31.00 ssu
Max. Volume of Suspended Solids : 0 %
Mechanical Seal Type : Double
Impeller No. (see curve image) : M
Warranty : 1 Year/s
Applications : Machine Tool
Applications : Parts Washer
PH High : 7 pH
Read more…  
$271133
Manufacturer: MTH Turbine Pump
Model Number: M52P-BF
Maximum Flow : 20 gallons/min
TDH (Head) Maximum @ 0GPM : 300 PSI
Head (TDH) Maximum @ 0GPM : 693 FT
HP Standard : 10 HP
Inlet Connection Type : FNPT
Inlet : 1.25 "
Outlet Connection Type : FNPT
Outlet : 1.25 "
Wetted Materials : CI
Wetted Materials : Bronze
Voltage : 460 V
Phase : 3
Speed : 3450 RPM
Viscosity : Water 1.00 cp 31.00 ssu
Max. Volume of Suspended Solids : 0 %
Mechanical Seal Type : Double
Impeller No. (see curve image) : P
Warranty : 1 Year/s
Applications : Machine Tool
Applications : Parts Washer
PH High : 7 pH
Read more…  
$311438
Jump to the first pageJump to the previous page Jump to the next pageJump to the last page
© 2000 - 2014 PumpBiz, Inc.  •  PumpBiz offers open accounts  •  All major credit cards accepted & PayPal  •  PumpBiz is a registered trademark of PumpBiz, Inc.