1/2 HP Residential and Light Commercial Sewage Pump
TWO VANE IMPELLER DESIGN PROVIDES MAXIMUM PUMP EFFICIENCY.
- Enclosed design for high effciency pumping.
- Eliminates possiblility of jamming between impeller and volute.
- Passes full 2" solids.
- Original performance can be restored if wear occurs by replacing volute seal ring.
- UL and CSA listed.
DURABLE MOTOR WILL DELIVER MANY YEARS OF RELIABLE SERVICE.
- Oil-filled (organic) motor for maximum heat dissipation and continuous bearing lubrication.
- High torque, PSC motors, no starting switch or relays to wear out.
- Wide agnle, mercury-free piggy-back mechanical float switch provides maximum draw down. (Automatic models only.)
Min. sump dia. simplex = 24 in. and duplex = 36 in.
Div. of Pentair Pump Group.
Model Number: MW50-21
Maximum Flow : 130 gallons/min
TDH (Head) Maximum @ 0GPM : 11.69 PSI
Head (TDH) Maximum @ 0GPM : 27 FT
TDH Minimum : 10
HP Standard : 0.5 HP
Outlet Connection Type : FNPT
Outlet : 2 "
Wetted Materials : CI-Plastic
Elastomers : Buna-Nitrile
Voltage : 230 V
Phase : 1
Frequency : 60 Hz
Motor : Hermetically Sealed
Speed : 1725 RPM
Max Operating Temp : 120 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 2 "
Max Specific Gravity : 1.1 sp. gr.
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 15 %
Shaft : 416SS
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Applications : Contractor
Applications : Dewatering
Applications : Fountain
Applications : Irrigation
Applications : Pond
Applications : Sewage
Applications : Slurry, Slush & Sludge
Applications : Submersible
Applications : Sump
PH High : 9 pH
Other : Max temp. to 140F intermittent
| Read more… |
$76600
ea.
|
Model Number: MW50-11
Maximum Flow : 130 gallons/min
TDH (Head) Maximum @ 0GPM : 11.69 PSI
Head (TDH) Maximum @ 0GPM : 27 FT
TDH Minimum : 10
HP Standard : 0.5 HP
Outlet Connection Type : FNPT
Outlet : 2 "
Wetted Materials : CI-Plastic
Elastomers : Buna-Nitrile
Voltage : 115 V
Phase : 1
Frequency : 60 Hz
Motor : Hermetically Sealed
Speed : 1725 RPM
Max Operating Temp : 120 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 2 "
Max Specific Gravity : 1.1 sp. gr.
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 15 %
Shaft : 416SS
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Applications : Contractor
Applications : Dewatering
Applications : Fountain
Applications : Irrigation
Applications : Pond
Applications : Sewage
Applications : Slurry, Slush & Sludge
Applications : Submersible
Applications : Sump
PH High : 9 pH
Other : Max temp. to 140F intermittent
| Read more… |
$76600
ea.
|
115v 1/2HP Automatic
Model Number: MW50-11P
Maximum Flow : 130 gallons/min
TDH (Head) Maximum @ 0GPM : 11.69 PSI
Head (TDH) Maximum @ 0GPM : 27 FT
TDH Minimum : 10
HP Standard : 0.5 HP
Outlet Connection Type : FNPT
Outlet : 2 "
Wetted Materials : CI-Plastic
Elastomers : Buna-Nitrile
Voltage : 115 V
Phase : 1
Frequency : 60 Hz
Motor : Hermetically Sealed
Speed : 1725 RPM
Max Operating Temp : 120 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 2 "
Max Specific Gravity : 1.1 sp. gr.
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 15 %
Shaft : 416SS
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Applications : Contractor
Applications : Dewatering
Applications : Fountain
Applications : Irrigation
Applications : Pond
Applications : Sewage
Applications : Slurry, Slush & Sludge
Applications : Submersible
Applications : Sump
PH High : 9 pH
Other : Max temp. to 140F intermittent
| Read more… |
$77700
ea.
|
Model Number: MW50-21P
Maximum Flow : 130 gallons/min
TDH (Head) Maximum @ 0GPM : 11.69 PSI
Head (TDH) Maximum @ 0GPM : 27 FT
TDH Minimum : 10
HP Standard : 0.5 HP
Outlet Connection Type : FNPT
Outlet : 2 "
Wetted Materials : CI-Plastic
Elastomers : Buna-Nitrile
Voltage : 230 V
Phase : 1
Frequency : 60 Hz
Motor : Hermetically Sealed
Speed : 1725 RPM
Max Operating Temp : 120 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 2 "
Max Specific Gravity : 1.1 sp. gr.
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 15 %
Shaft : 416SS
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Applications : Contractor
Applications : Dewatering
Applications : Fountain
Applications : Irrigation
Applications : Pond
Applications : Sewage
Applications : Slurry, Slush & Sludge
Applications : Submersible
Applications : Sump
PH High : 9 pH
Other : Max temp. to 140F intermittent
| Read more… |
$66300
ea.
|



