Pumps for acids are often used to unload trucks carrying chemical products or IBC containers. But the problem when dealing with trucks is that they often don't have an electric box with
Every month pumpbiz plans to give out a free pump to someone in need. Head over to http://freepumps.com and submit your story. We will contact the person with the most compelling story at the
Trucks, cars, and other vehicles as well as other Small engines running on our propane conversion systems have been proven to have 80% cleaner emissions and help the engine last longer than
Lancaster Submersible Water Well Pump offers a broad selection of 4" submersible well pumps. They range in horsepower from 1/2 to 7-1/2 HP, with the most popular pump size being 1/2 to 1-1/2 HP, available in Corrosion Resistant Thermoplastic, Lead Free Brass, Cast Iron or Super Strength Stainless Steel. Capacities range from 5,7,10,15,25,30,45,60 and 90 gallons per minute with heads as high as 900 feet.
Standard Features Include:
Discharge Head with Internal "Anti-Spin" Check Valve (1/2 hp - 1-1/2 hp)
Stainless Steel Pump Casing, Hex Shaft and Coupling
Stainless Steel Intake Screen and Cable Guard - won't snap off during installation
Franklin Electrics Super Stainless Motors
Three wire submersible motors require a control box. Control boxes contain a starting relay, starting capacitors and in some cases overload protectors. Two wire submersible motors have these components built into them and do not require a control box.
One benefit of using a three wire motor with a control box is that some of the components that are subject to failure are located above ground where you can get to them without pulling the pump.
Stainless units (4th digit X-XXS) have Discharge Head and Motor Adapter- Stainless Steel. Impellers and bowls are Noryl engineering thermo-Plastic.