Industrial grade pumps for the residential market. Energy Star sump pumps.
PHCC Pro Series submersible pumps. Sump pump, sewage pump, submersible dewatering pump, effluent pump. Not all sump pumps are created equal!
The complete line of AC pumps are rated for continuous duty, which means they are built to run continuously 365 days a year, 24 hours a day. They're strong and dependable, and when they are used intermittently in a sump application, it extends the life of the pump. We back this up by offering 2, 3 and 5-year warranties when the pumps are used in intermittent applications. 10 second time delay off from low float level. This allows pump down.
Features
- Continuous duty construction
- Cast iron and stainless steel housing with primed and double baked paint
- Strong Capacitor start motor
- Stainless steel shaft
- Upper and lower ball bearings
- Dual carbon ceramic seals
- Dynamically balanced cast iron impeller
- Stainless steel fasteners
- Removable strainer
- 20' cord length
- Includes Dual Float Controller patent pending
- Energy efficient
Watch the battle of the pumps For Battery Backup Sump pump see BWSP model.
 |
 |
 |
 |
 |
 |
 |
 |
||||||
1/3HP 4100GPH
Manufacturer: Pro Series Pumps
Model Number: ST1033-DFC1 Pro sump pump
Maximum Flow : 68 gallons/min
TDH (Head) Maximum @ 0GPM : 14 PSI
Head (TDH) Maximum @ 0GPM : 31 FT
HP Standard : 0.33 HP
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : CI
Wetted Materials : Aluminum
Wetted Materials : 416SS
Elastomers : Buna-Nitrile
Voltage : 115 V
Phase : 1
Frequency : 60 Hz
Motor : Hermetically Sealed
Motor Amps : 3.8 A
MTR Cord Length : 10 FT
Motor Cord Size : 16/3
Max Operating Temp : 104 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.19 "
Max. Particle Hardness : 4 MOH
Max. Volume of Suspended Solids : 5 %
Shaft : 416SS
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Double
Motor Bearings : Ball
Impeller Mat'l / Type : Cast Iron, semi-open
Warranty : 1.5 Year/s
Applications : Contractor
Applications : Dewatering
Applications : Fountain
Applications : Pond
Applications : Submersible
Applications : Sump
PH High : 7 pH
Other : <STRONG>The Dual Float switch:
Approvals : UL
Approvals : cUL
Duty : Continuous
| Read more… |
$18600
ea.
|
Backup and primary Pump system
Manufacturer: Pro Series Pumps
Model Number: PS-C33
Maximum Flow : 53 gallons/min
TDH (Head) Maximum @ 0GPM : 11 PSI
Head (TDH) Maximum @ 0GPM : 26 FT
Head @ BEP : 10 FT
HP Standard : 0.33 HP
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : 304SS
Wetted Materials : CI-Plastic
Elastomers : Buna-Nitrile
Voltage : 115 V
Phase : 1
Frequency : 60 Hz
Motor : Hermetically Sealed
Motor Amps : 4 A
Length : 25 "
Max Operating Temp : 104 °F
Viscosity : Water 1.00 cp 31.00 ssu
Max. Particle Size : 0.13 "
Max. Particle Hardness : 4 MOH
Max. Volume of Suspended Solids : 3 %
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Warranty : 3 Year/s
Applications : Sump
PH High : 7 pH
Other : Pump ON levels: 10" for main p
| Read more… |
$115900
ea.
|
1/3HP USC3 Switch
Manufacturer: Pro Series Pumps
Model Number: S3033USC3 Pro sump pump PHCC
Maximum Flow : 53 gallons/min
TDH (Head) Maximum @ 0GPM : 11 PSI
Head (TDH) Maximum @ 0GPM : 26 FT
HP Standard : 0.33 HP
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : CI
Wetted Materials : 416SS
Elastomers : Buna-Nitrile
Voltage : 115 V
Phase : 1
Frequency : 60 Hz
Motor : Hermetically Sealed
Motor Amps : 4 A
Speed : 1725 RPM
MTR Cord Length : 10 FT
Max Operating Temp : 104 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.19 "
Max. Particle Hardness : 4 MOH
Max. Volume of Suspended Solids : 5 %
Shaft : 416SS
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Double
Motor Bearings : Ball
Impeller Mat'l / Type : Cast Iron, semi-open
Warranty : 3 Year/s
Applications : Contractor
Applications : Dewatering
Applications : Fountain
Applications : Pond
Applications : Submersible
Applications : Sump
PH High : 7 pH
Other : 3-year warranties when the pum
Approvals : CSA
Duty : Continuous
Gallons per Watt Hour (G/Wh) : 6.25
| Read more… |
$38900
ea.
|
1/3HP
Manufacturer: Pro Series Pumps
Model Number: S3033DFC2 Pro sump pump PHCC
Maximum Flow : 53 gallons/min
TDH (Head) Maximum @ 0GPM : 11 PSI
Head (TDH) Maximum @ 0GPM : 26 FT
HP Standard : 0.33 HP
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : CI
Wetted Materials : 416SS
Elastomers : Buna-Nitrile
Voltage : 115 V
Phase : 1
Frequency : 60 Hz
Motor : Hermetically Sealed
Motor Amps : 4 A
Speed : 1725 RPM
MTR Cord Length : 10 FT
Max Operating Temp : 104 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.19 "
Max. Particle Hardness : 4 MOH
Max. Volume of Suspended Solids : 5 %
Shaft : 416SS
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Double
Motor Bearings : Ball
Impeller Mat'l / Type : Cast Iron, semi-open
Warranty : 3 Year/s
Applications : Contractor
Applications : Dewatering
Applications : Fountain
Applications : Pond
Applications : Submersible
Applications : Sump
PH High : 7 pH
Other : <STRONG>The Dual Float switch:
Approvals : CSA
Duty : Continuous
Gallons per Watt Hour (G/Wh) : 6.25
| Read more… |
Sale Price
|
$26000
ea.
|
Regular: $345.00
You Save: $85.00
You Save: $85.00
4/10HP 115v
Manufacturer: Pro Series Pumps
Model Number: E7040-NSSewage Pump
Maximum Flow : 74 gallons/min
TDH (Head) Maximum @ 0GPM : 10 PSI
Head (TDH) Maximum @ 0GPM : 22 FT
HP Standard : 0.4 HP
Outlet Connection Type : FNPT
Outlet : 2 "
Wetted Materials : CI
Elastomers : Buna-Nitrile
Voltage : 115 V
Phase : 1
Frequency : 60 Hz
Motor : Hermetically Sealed
Motor Amps : 6.3 A
Speed : 3450 RPM
MTR Cord Length : 10 FT
Max Operating Temp : 104 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.19 "
Max. Particle Hardness : 4 MOH
Max. Volume of Suspended Solids : 2 %
Shaft : 416SS
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Double
Motor Bearings : Ball
Warranty : 3 Year/s
Applications : Contractor
Applications : Dewatering
Applications : Fountain
Applications : Pond
Applications : Submersible
Applications : Sump
PH High : 7 pH
Other : 3-year warranties when the pum
Duty : Continuous
| Read more… |
$18500
ea.
|
1/2HP 115v Non-automatic
Manufacturer: Pro Series Pumps
Model Number: E7055 Sewage Pump
Maximum Flow : 89 gallons/min
TDH (Head) Maximum @ 0GPM : 11 PSI
Head (TDH) Maximum @ 0GPM : 23 FT
HP Standard : 0.5 HP
Outlet Connection Type : FNPT
Outlet : 2 "
Wetted Materials : CI
Elastomers : Buna-Nitrile
Voltage : 115 V
Phase : 1
Frequency : 60 Hz
Motor : Hermetically Sealed
Motor Amps : 7 A
Speed : 3450 RPM
MTR Cord Length : 20 FT
Max Operating Temp : 104 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.19 "
Max. Particle Hardness : 4 MOH
Max. Volume of Suspended Solids : 2 %
Shaft : 416SS
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Double
Motor Bearings : Ball
Impeller Mat'l / Type : Cast Iron, semi-open
Warranty : 3 Year/s
Applications : Contractor
Applications : Dewatering
Applications : Fountain
Applications : Pond
Applications : Submersible
Applications : Sump
PH High : 7 pH
Other : 3 year warranties when the pum
Duty : Continuous
| Read more… |
$29900
ea.
|
1/2HP 115v with switch
Manufacturer: Pro Series Pumps
Model Number: E7055-USC3 Sewage Pump Ultimate Sensor
Maximum Flow : 89 gallons/min
TDH (Head) Maximum @ 0GPM : 11 PSI
Head (TDH) Maximum @ 0GPM : 23 FT
HP Standard : 0.5 HP
Outlet Connection Type : FNPT
Outlet : 2 "
Wetted Materials : CI
Elastomers : Buna-Nitrile
Voltage : 115 V
Phase : 1
Frequency : 60 Hz
Motor : Hermetically Sealed
Motor Amps : 7 A
Speed : 3450 RPM
MTR Cord Length : 20 FT
Max Operating Temp : 104 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.19 "
Max. Particle Hardness : 4 MOH
Max. Volume of Suspended Solids : 2 %
Shaft : 416SS
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Double
Motor Bearings : Ball
Warranty : 3 Year/s
Applications : Contractor
Applications : Dewatering
Applications : Fountain
Applications : Pond
Applications : Submersible
Applications : Sump
PH High : 7 pH
Other : <STRONG>The Dual Float switch:
Duty : Continuous
| Read more… |
$42200
ea.
|
1/2HP
Manufacturer: Pro Series Pumps
Model Number: ST1050 Pro sump pump PHCC
Maximum Flow : 53 gallons/min
TDH (Head) Maximum @ 0GPM : 11 PSI
Head (TDH) Maximum @ 0GPM : 26 FT
HP Standard : 0.5 HP
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : CI
Wetted Materials : 416SS
Elastomers : Buna-Nitrile
Voltage : 115 V
Phase : 1
Frequency : 60 Hz
Motor : Hermetically Sealed
Motor Amps : 4 A
Speed : 1725 RPM
MTR Cord Length : 10 FT
Max Operating Temp : 104 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.19 "
Max. Particle Hardness : 4 MOH
Max. Volume of Suspended Solids : 5 %
Shaft : 416SS
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Double
Motor Bearings : Ball
Impeller Mat'l / Type : Cast Iron, semi-open
Warranty : 3 Year/s
Applications : Contractor
Applications : Dewatering
Applications : Fountain
Applications : Pond
Applications : Submersible
Applications : Sump
PH High : 7 pH
Other : <STRONG>The Dual Float switch:
Approvals : CSA
Duty : Continuous
Gallons per Watt Hour (G/Wh) : 6.25
| Read more… |
$34500
ea.
|
1/2HP, Manual
Manufacturer: Pro Series Pumps
Model Number: S5050
Maximum Flow : 62 gallons/min
TDH (Head) Maximum @ 0GPM : 15 PSI
Head (TDH) Maximum @ 0GPM : 36 FT
GPM of Water @ 15 Ft. of Head : 43
GPM of Water @ 20 Ft. of Head : 30
HP Standard : 0.5 HP
Outlet Connection Type : FNPT
Outlet : 2 "
Wetted Materials : CI
Elastomers : Buna-Nitrile
Voltage : 115 V
Phase : 1
Frequency : 60 Hz
Motor : Hermetically Sealed
Motor Amps : 6.8 A
Speed : 3450 RPM
MTR Cord Length : 20 FT
Max Operating Temp : 104 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.19 "
Max. Particle Hardness : 4 MOH
Max. Volume of Suspended Solids : 2 %
Shaft : 416SS
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Double
Motor Bearings : Ball
Warranty : 5 Year/s
Applications : Contractor
Applications : Dewatering
Applications : Fountain
Applications : Pond
Applications : Submersible
Applications : Sump
PH High : 7 pH
Other : <STRONG>The Dual Float switch:
Approvals : CSA
Duty : Continuous
| Read more… |
$42300
ea.
|
1/2HP
Manufacturer: Pro Series Pumps
Model Number: S5050-DFC1
Maximum Flow : 62 gallons/min
TDH (Head) Maximum @ 0GPM : 16 PSI
Head (TDH) Maximum @ 0GPM : 36 FT
GPM of Water @ 15 Ft. of Head : 43
GPM of Water @ 20 Ft. of Head : 30
HP Standard : 0.5 HP
Outlet Connection Type : FNPT
Outlet : 2 "
Wetted Materials : CI
Elastomers : Buna-Nitrile
Voltage : 115 V
Phase : 1
Frequency : 60 Hz
Motor : Hermetically Sealed
Motor Amps : 6.8 A
Speed : 3450 RPM
MTR Cord Length : 20 FT
Max Operating Temp : 104 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.19 "
Max. Particle Hardness : 4 MOH
Max. Volume of Suspended Solids : 2 %
Shaft : 416SS
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Double
Motor Bearings : Ball
Warranty : 5 Year/s
Applications : Contractor
Applications : Dewatering
Applications : Fountain
Applications : Pond
Applications : Submersible
Applications : Sump
PH High : 7 pH
Other : <STRONG>The Dual Float switch:
Approvals : CSA
Duty : Continuous
| Read more… |
$55200
ea.
|
|
|
|
|
|
|
|
|
||||||