Corrosion resistant Noryl (black) or Polypropylene (white) Centrifugal pumps. Performance pumps available close coupled to a electric motor or mounted to a bearing pedestal for engine, motor or other drive options. Great for plating solutions, fume scrubbers, chillers, ponds, cascade fountains, pools / spas, water features and waste treatment. These are high efficiency performance. All pumps include a 1/4" NPT drain plug. All pumps have 1-1/2" threaded ports. Discharge can be rotated in 90-degree increments.
Polypro is designed for light industrial or commercial water-based applications. The pumps are glass-filled polypropylene construction offering chemical resistance to most acids, alkalies, and inorganic solvents as does the Noryl series. The difference is these pumps are equipped with a carbon ceramic mechanical seal with Buna-N elastomer's with the stainless steel components that are not sealed, but still protect the motor or pedestal shaft from chemical exposure. The Polypropylene series cannot handle added inlet booster pressures and is rated for a maximum temperature of 140° F. However, upgraded chemical-resistant, polypropylene-encased seals are available.
Noryl is designed for industrial chemical applications. The pumps are made of Noryl, which is non-metallic, chemical-resistant to most acids, alkalies, and inorganic solvents. This material is stiffer under pressure and temperature than the Polypro series. The Noryl handles inlet booster pressures to 30 psi and a maximum temperature of 180° F. These pumps are equipped with a unique chemical-resistant carbon ceramic mechanical seal with Viton elastomer having the stainless steel components sealed in Noryl allowing for a complete non-metallic Noryl wet end. Even the motor and pedestal drive shaft is protected by the seal design.
Pumps include a unique water flush port and plug for flushing the mechanical seal during use with aggressive fluids. Choice of seals include carbon and also silicon carbide. Motors are either ODP or TEFC and elastomer's are Buna-N or Viton. Booster pump for RO and marine applications.
Replacement seals are 2445x-xx under parts.
Warning: Use only with nonflammable liquids and in non-explosive atmospheres.
 |
 |
 |
 |
 |
 |
 |
 |
||||||
3/4HP impeller
Manufacturer: Hypro SHURflo Pumps
Model Number: 23438
Maximum Flow : 40 gallons/min
HP Required : 0.75 HP
Motor : TEFC
Motor Frame : 56J thrd
Max Operating Temp : 180 °F
Max. Particle Size : 0.12 "
Impeller No. (see curve image) : 2
Impeller Mat'l / Type : Noryl, closed
Applications : Chemical
Applications : Coolant
Applications : Irrigation
| Read more… |
$4500
ea.
|
Manufacturer: Hypro SHURflo Pumps
Model Number: CHPPPB6
Maximum Flow : 130 gallons/min
TDH (Head) Maximum @ 0GPM : 41.13 PSI
Head (TDH) Maximum @ 0GPM : 95 FT
HP Required : 2.6 HP
Inlet Connection Type : FNPT
Inlet : 1.5 "
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : PolyPro-GF
Elastomers : Buna-Nitrile
Speed : 3450 RPM
Length : 9.3 "
Max Operating Temp : 160 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.12 "
Max Specific Gravity : 1.1 sp. gr.
Max. Volume of Suspended Solids : 1 %
Shaft : 416SS
Mechanical Seal : Type 21
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Stages : 1
Impeller No. (see curve image) : 6
Warranty : 1 Year/s
Applications : Flooded Suction
Applications : Chemical
Applications : Cooling
Applications : Irrigation
Applications : Marine
Applications : Parts Washer
Applications : Plating
Applications : Pond
Applications : Solvent
PH High : 9 pH
Other : Shaft is 5/8" diameter. Shaft
| Read more… |
$43400
ea.
|
Manufacturer: Hypro SHURflo Pumps
Model Number: CHMPB34T
Maximum Flow : 68 gallons/min
TDH (Head) Maximum @ 0GPM : 37.23 PSI
Head (TDH) Maximum @ 0GPM : 86 FT
HP Required : 1.6 HP
HP Standard : 1 HP
Inlet Connection Type : FNPT
Inlet : 1.5 "
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : PolyPro-GF
Elastomers : Buna-Nitrile
Voltage : 115/230 V
Phase : 1
Frequency : 60 Hz
Motor : TEFC
Speed : 3450 RPM
Motor Frame : 56J Keyed
Max Operating Temp : 160 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max Specific Gravity : 1.1 sp. gr.
Max. Volume of Suspended Solids : 1 %
Shaft : 416SS
Mechanical Seal : Type 21
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Stages : 1
Impeller No. (see curve image) : 3
Warranty : 1 Year/s
Applications : Flooded Suction
Applications : Chemical
Applications : Cooling
Applications : Fountain
Applications : Irrigation
Applications : Marine
Applications : Parts Washer
Applications : Plating
Applications : Pond
Applications : Solvent
PH High : 9 pH
| Read more… |
$77600
ea.
|
Manufacturer: Hypro SHURflo Pumps
Model Number: CMNP243T
Maximum Flow : 47 gallons/min
TDH (Head) Maximum @ 0GPM : 34.63 PSI
Head (TDH) Maximum @ 0GPM : 80 FT
HP Standard : 1 HP
Inlet Connection Type : FNPT
Inlet : 1.5 "
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : Noryl-PPO
Elastomers : Viton
Voltage : 208-230/460 V
Phase : 3
Frequency : 50/60 Hz
Motor : TEFC
Speed : 3450 RPM
Motor Frame : 56J Keyed
Max Operating Temp : 160 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max Specific Gravity : 1.1 sp. gr.
Max. Volume of Suspended Solids : 1 %
Shaft : 416SS
Mechanical Seal : Type 21
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Impeller No. (see curve image) : 2
Impeller Mat'l / Type : Plastic same as pump, closed
Rotation : CW facing motor side Drive End
Warranty : 1 Year/s
Applications : Flooded Suction
Applications : Chemical
Applications : Cooling
Applications : Fountain
Applications : Irrigation
Applications : Marine
Applications : Parts Washer
Applications : Plating
Applications : Pond
Applications : Solvent
PH High : 10 pH
Duty : Continuous
| Read more… |
Sale Price
|
$55900
ea.
|
Regular: $875.00
You Save: $316.00
You Save: $316.00
PEO
Manufacturer: Hypro SHURflo Pumps
Model Number: CHMNA2X
Maximum Flow : 37 gallons/min
TDH (Head) Maximum @ 0GPM : 37 PSI
Head (TDH) Maximum @ 0GPM : 72 FT
HP Required : 0.75 HP
Inlet Connection Type : FNPT
Inlet : 1.5 "
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : Noryl-PPO
Elastomers : Viton
Motor : TENV
Motor Amps : 50 A
Speed : 3450 RPM
Motor Frame : 56J Keyed
Max Operating Temp : 160 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.13 "
Max Specific Gravity : 1.1 sp. gr.
Max. Particle Hardness : 4 MOH
Max. Volume of Suspended Solids : 1 %
Mechanical Seal : Type 21
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Impeller No. (see curve image) : 2
Warranty : 1 Year/s
Applications : Flooded Suction
Applications : Chemical
Applications : Irrigation
Applications : Marine
Applications : Solvent
PH High : 9 pH
| Read more… |
$43000
ea.
|
Manufacturer: Hypro SHURflo Pumps
Model Number: CHMNA673T
Maximum Flow : 110 gallons/min
Head (TDH) Maximum @ 0GPM : 95 FT
HP Required : 3 HP
Inlet Connection Type : FNPT
Inlet : 1.5 "
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : Noryl-PPO
Elastomers : Viton
Voltage : 230/460 V
Phase : 3
Motor : TENV
Speed : 3450 RPM
Motor Frame : 56J Keyed
Max Operating Temp : 180 °F
Viscosity : Cream 16.50 cp 100.00 ssu
Max. Particle Size : 0.13 "
Max Specific Gravity : 1 sp. gr.
Max. Particle Hardness : 4 MOH
Max. Volume of Suspended Solids : 1 %
Mechanical Seal : Type 21
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Impeller No. (see curve image) : 2
Warranty : 1 Year/s
Applications : Flooded Suction
Applications : Chemical
Applications : Irrigation
Applications : Marine
Applications : Solvent
PH High : 9 pH
| Read more… |
$99000
ea.
|
Manufacturer: Hypro SHURflo Pumps
Model Number: CHMPB233T
Maximum Flow : 36 gallons/min
TDH (Head) Maximum @ 0GPM : 32.9 PSI
Head (TDH) Maximum @ 0GPM : 76 FT
HP Standard : 0.75 HP
Inlet Connection Type : FNPT
Inlet : 1.5 "
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : PolyPro-GF
Elastomers : Buna-Nitrile
Voltage : 208-230/460 V
Phase : 3
Frequency : 50/60 Hz
Motor : TEFC
Speed : 3450 RPM
Motor Frame : 56J Keyed
Self Priming : 0
Max Operating Temp : 140 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max Specific Gravity : 1.1 sp. gr.
Max. Volume of Suspended Solids : 1 %
Shaft : 416SS
Mechanical Seal : Type 21
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Stages : 1
Impeller No. (see curve image) : 1
Warranty : 1 Year/s
Applications : Cooling
Applications : Flooded Suction
Applications : Fountain
Applications : Irrigation
Applications : Marine
Applications : Parts Washer
Applications : Plating
Applications : Pond
Applications : Solvent
Applications : Chemical
PH High : 9 pH
| Read more… |
$58300
ea.
|
Manufacturer: Hypro SHURflo Pumps
Model Number: CMPB133T
Maximum Flow : 36 gallons/min
TDH (Head) Maximum @ 0GPM : 32.9 PSI
Head (TDH) Maximum @ 0GPM : 76 FT
HP Required : 0.75 HP
HP Standard : 0.75 HP
Inlet Connection Type : FNPT
Inlet : 1.5 "
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : PolyPro-GF
Elastomers : Buna-Nitrile
Voltage : 208-230/460 V
Phase : 3
Frequency : 50/60 Hz
Motor : TEFC
Speed : 3450 RPM
Motor Frame : 56J Keyed
Self Priming : 0
Max Operating Temp : 140 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max Specific Gravity : 1.1 sp. gr.
Max. Volume of Suspended Solids : 1 %
Shaft : 416SS
Mechanical Seal : Type 21
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Stages : 1
Impeller No. (see curve image) : 1
Warranty : 1 Year/s
Applications : Chemical
Applications : Cooling
Applications : Flooded Suction
Applications : Fountain
Applications : Irrigation
Applications : Marine
Applications : Parts Washer
Applications : Plating
Applications : Pond
Applications : Solvent
PH High : 9 pH
| Read more… |
$66900
ea.
|
Manufacturer: Hypro SHURflo Pumps
Model Number: CMPB22T
Maximum Flow : 48 gallons/min
TDH (Head) Maximum @ 0GPM : 34.63 PSI
Head (TDH) Maximum @ 0GPM : 80 FT
HP Required : 0.5 HP
HP Standard : 0.5 HP
Inlet Connection Type : FNPT
Inlet : 1.5 "
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : PolyPro-GF
Elastomers : Buna-Nitrile
Voltage : 115/230 V
Phase : 1
Frequency : 50/60 Hz
Motor : TEFC
Speed : 3450 RPM
Motor Frame : 56J Keyed
Self Priming : 0
Max Operating Temp : 140 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max Specific Gravity : 1.1 sp. gr.
Max. Volume of Suspended Solids : 1 %
Shaft : 416SS
Mechanical Seal : Type 21
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Stages : 1
Impeller No. (see curve image) : 2
Warranty : 1 Year/s
Applications : Chemical
Applications : Cooling
Applications : Flooded Suction
Applications : Fountain
Applications : Irrigation
Applications : Marine
Applications : Parts Washer
Applications : Plating
Applications : Pond
Applications : Solvent
PH High : 9 pH
| Read more… |
$58300
ea.
|
Manufacturer: Hypro SHURflo Pumps
Model Number: CMPB663T
Maximum Flow : 70 gallons/min
TDH (Head) Maximum @ 0GPM : 41.13 PSI
Head (TDH) Maximum @ 0GPM : 95 FT
HP Required : 2.6 HP
HP Standard : 2 HP
Inlet Connection Type : FNPT
Inlet : 1.5 "
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : PolyPro-GF
Elastomers : Buna-Nitrile
Voltage : 208-230/460 V
Phase : 3
Frequency : 50/60 Hz
Motor : TEFC
Speed : 3450 RPM
Motor Frame : 56J Keyed
Self Priming : 0
Max Operating Temp : 140 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.12 "
Max Specific Gravity : 1 sp. gr.
Max. Volume of Suspended Solids : 1 %
Shaft : 416SS
Mechanical Seal : Type 21
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Stages : 1
Impeller No. (see curve image) : 6
Warranty : 1 Year/s
Applications : Chemical
Applications : Cooling
Applications : Flooded Suction
Applications : Fountain
Applications : Irrigation
Applications : Marine
Applications : Parts Washer
Applications : Plating
Applications : Pond
Applications : Solvent
PH High : 9 pH
Other : This pump impeller and motor H
| Read more… |
$98800
ea.
|
|
|
|
|
|
|
|
|
||||||