Sanitary Pumps for food processing and or beverage production. These include food grade sanitary pumps for oils, honey, milk, beer potable water, extracts, paste and more. The term sanitary is often confused or mis-used. It means different levels of cleanliness or cleanability to different people. Sometimes refered to as FDA approved or complient and 3A approved. Depending on level needed the prices vary greatly.
Most users of a Food Grade sanitary pump simply need it to be made of Stainless Steel and other non hazardous materials. Some need them to be easy to clean and have "Tri" clamp connections. While the most stringent sanitary pumps with FDA or 3A approval are ones which can easily be taken apart and completely cleaned and sanitized.
Manufacturer: Monarch Centrifugal Pumps
Model Number: 90230002
Maximum Flow : 220 gallons/min
TDH (Head) Maximum @ 0GPM : 60.61 PSI
Head (TDH) Maximum @ 0GPM : 140 FT
HP Required : 15 HP
Inlet Connection Type : FNPT
Inlet : 2 "
Outlet Connection Type : FNPT
Outlet : 2 "
Wetted Materials : CI
Elastomers : Viton
Self Priming : 1
Suction Lift : 25 FT
Max. Particle Size : 0.75 "
Max. Volume of Suspended Solids : 0 %
Shaft : 304SS
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Impeller Size (see curve image) : 6.25
Warranty : 1 Year/s
Applications : Dewatering
Applications : Marine
Applications : Sanitary
Applications : Self-Priming
Applications : Sewage
Applications : Slurry, Slush & Sludge
PH High : 7 pH
Other : Shaft Dia.: 1-1/4"
<br>Shaft
| Read more… |
$260200
ea.
|
Manufacturer: Monarch Centrifugal Pumps
Model Number: 90230003
Maximum Flow : 365 gallons/min
TDH (Head) Maximum @ 0GPM : 77.92 PSI
Head (TDH) Maximum @ 0GPM : 180 FT
HP Required : 20 HP
Inlet Connection Type : FNPT
Inlet : 3 "
Outlet Connection Type : FNPT
Outlet : 3 "
Wetted Materials : CI
Elastomers : Viton
Self Priming : 1
Suction Lift : 25 FT
Max. Particle Size : 1 "
Max. Volume of Suspended Solids : 0 %
Shaft : 304SS
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Impeller Size (see curve image) : 6.94
Warranty : 1 Year/s
Applications : Dewatering
Applications : Marine
Applications : Sanitary
Applications : Self-Priming
Applications : Sewage
Applications : Slurry, Slush & Sludge
PH High : 7 pH
Other : Shaft Dia.: 1-1/4"
<br>Shaft
| Read more… |
$288800
ea.
|
Manufacturer: Monarch Centrifugal Pumps
Model Number: 90230004
Maximum Flow : 690 gallons/min
TDH (Head) Maximum @ 0GPM : 60.61 PSI
Head (TDH) Maximum @ 0GPM : 140 FT
HP Required : 25 HP
Inlet Connection Type : FNPT
Inlet : 4 "
Outlet Connection Type : FNPT
Outlet : 4 "
Wetted Materials : CI
Elastomers : Viton
Self Priming : 1
Suction Lift : 25 FT
Max. Particle Size : 1 "
Max. Volume of Suspended Solids : 0 %
Shaft : 304SS
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Impeller Size (see curve image) : 8.718
Warranty : 1 Year/s
Applications : Dewatering
Applications : Marine
Applications : Sanitary
Applications : Self-Priming
Applications : Sewage
Applications : Slurry, Slush & Sludge
PH High : 7 pH
Other : Shaft Dia.: 1-5/8"
<br>Shaft
| Read more… |
$437400
ea.
|
Manufacturer: Wayne Water Pumps
Model Number: WAP100
Maximum Flow : 92 gallons/min
TDH (Head) Maximum @ 0GPM : 15.15 PSI
Head (TDH) Maximum @ 0GPM : 35 FT
HP Required : 1 HP
HP Standard : 1 HP
Inlet Connection Type : FNPT
Inlet : 1.5 "
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : Noryl-PPO
Elastomers : Buna-Nitrile
Voltage : 115/230 V
Phase : 1
Frequency : 60 Hz
Motor : ODP
Motor Amps : 8.7 A
Length : 21 "
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 0 %
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Applications : Sanitary
PH High : 8 pH
| Read more… |
$32706
ea.
|
Ezi-action
Manufacturer: Generic Pumps
Model Number: 200/55PP
Maximum Flow : 5 gallons/min
TDH (Head) Maximum @ 0GPM : 0.43 PSI
Head (TDH) Maximum @ 0GPM : 1 FT
Outlet : 0.63 "
Wetted Materials : PolyPro
Wetted Materials : Polyethylene
Length : 36.5 "
Max Operating Temp : 120 °F
Viscosity : Glycerine 880.00 cp 5000.00 ss
Max. Particle Size : 0 "
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 0 %
Applications : Chemical
Applications : Coolant
Applications : Contractor
Applications : Drum
Applications : Fuel Oil
Applications : Hand
Applications : Metering
Applications : Plating
Applications : Sanitary
Other : Qty pricing is available. Mast
| Read more… |
$5800
ea.
|
Manufacturer: Wayne Water Pumps
Model Number: WIP100
Maximum Flow : 92 gallons/min
TDH (Head) Maximum @ 0GPM : 25.97 PSI
Head (TDH) Maximum @ 0GPM : 60 FT
HP Required : 1 HP
HP Standard : 1 HP
Inlet Connection Type : FNPT
Inlet : 1.5 "
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : Noryl-PPO
Elastomers : Buna-Nitrile
Voltage : 115/230 V
Phase : 1
Frequency : 60 Hz
Motor : ODP
Motor Amps : 14.5/7.2 A
Length : 25.5 "
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 0 %
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Applications : Sanitary
PH High : 8 pH
| Read more… |
$34914
ea.
|
Manufacturer: Flotec Water Pumps
Model Number: AT251501-01
Maximum Flow : 102 gallons/min
TDH (Head) Maximum @ 0GPM : 30.3 PSI
Head (TDH) Maximum @ 0GPM : 70 FT
HP Required : 1.5 HP
HP Standard : 1.5 HP
Inlet Connection Type : FNPT
Inlet : 1.5 "
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : Noryl-PPO
Elastomers : Buna-Nitrile
Voltage : 115/230 V
Phase : 1
Frequency : 60 Hz
Motor : ODP
Motor Amps : 14.5/7.2 A
Length : 25.5 "
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 0 %
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Applications : Sanitary
PH High : 8 pH
| Read more… |
$76400
ea.
|
Manufacturer: Flotec Water Pumps
Model Number: FP6131
Maximum Flow : 92 gallons/min
TDH (Head) Maximum @ 0GPM : 15.15 PSI
Head (TDH) Maximum @ 0GPM : 35 FT
HP Required : 1 HP
HP Standard : 1 HP
Inlet Connection Type : FNPT
Inlet : 1.5 "
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : Noryl-PPO
Elastomers : Buna-Nitrile
Voltage : 115/230 V
Phase : 1
Frequency : 60 Hz
Motor : ODP
Motor Amps : 8.7 A
Length : 21 "
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 0 %
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Applications : Sanitary
PH High : 8 pH
| Read more… |
$31900
ea.
|
Manufacturer: Flotec Water Pumps
Model Number: AT251001-01
Maximum Flow : 92 gallons/min
TDH (Head) Maximum @ 0GPM : 25.97 PSI
Head (TDH) Maximum @ 0GPM : 60 FT
HP Required : 1 HP
HP Standard : 1 HP
Inlet Connection Type : FNPT
Inlet : 1.5 "
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : Noryl-PPO
Elastomers : Buna-Nitrile
Voltage : 115/230 V
Phase : 1
Frequency : 60 Hz
Motor : ODP
Motor Amps : 14.5/7.2 A
Length : 25.5 "
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 0 %
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Applications : Sanitary
PH High : 8 pH
| Read more… |
$54900
ea.
|
Manufacturer: Hypro SHURflo Pumps
Model Number: FGS17-4PH SSD1B
Maximum Flow : 1.5 gallons/min
TDH (Head) Maximum @ 0GPM : 150 PSI
Head (TDH) Maximum @ 0GPM : 346.5 FT
Inlet : 1.5 "
Outlet : 1.5 "
Wetted Materials : 304SS
Max Operating Temp : 120 °F
Max. Volume of Suspended Solids : 0 %
Shaft : 304SS
Mechanical Seal Type : Double
Applications : Sanitary
Applications : Self-Priming
PH High : 7 pH
Other : gear:19-4 SS
| Read more… |
$280000
ea.
|



